Complete Mercedes Sprinter Front, Side and Rear Body Kit Packages

Information: Complete Mercedes Sprinter Front, Side and Rear Body Kit Packages

A complete Sprinter body kit package combines a front bumper, side skirts, rear bumper and optional grille or roof spoiler into one cohesive exterior upgrade - eliminating mismatched parts and simplifying ordering for W906, W907/VS30 and W910 owners. At DL Auto Design, we manufacture and ship matched full Sprinter body kit sets worldwide, with ABS plastic and fiberglass options, TUV certificates on selected parts, and 0% VAT for non-EU buyers.

Why Order a Full Sprinter Body Kit Instead of Individual Parts

Ordering front, side and rear components separately risks mismatched gaps, different surface textures and inconsistent styling lines. A complete Sprinter body kit package is designed as a single visual system, so every panel flows into the next without obvious joins. Lead times are shorter when you consolidate your order, and shipping costs are lower compared to multiple separate shipments from different suppliers.

For commercial operators running executive shuttle or VIP transfer fleets, a unified exterior look signals professionalism. For camper and conversion builders in the US and Europe, a matched kit protects resale value by creating a finished, intentional aesthetic rather than a patched-together appearance.

Generation and Fitment: W906, W907/VS30 and W910 Explained

Fitment is the single most important factor when ordering any Sprinter body kit package. Mercedes-Benz produced three distinct generations of Sprinter, and parts are not interchangeable between them.

The W907 facelift introduced a revised front face in model year 2021, so bumpers designed for 2018-2020 W907 vans require different mounting provisions than post-facelift versions. Always confirm your exact model year before ordering. Our product pages state clearly whether a part fits pre-facelift, post-facelift or both.

Wheelbase matters for side skirts and sill extensions. An L1 short-wheelbase skirt will leave gaps on an L3 or L4 long-wheelbase van. We offer W907 side skirts sized for the correct wheelbase, and our team can advise on trimming tolerances for non-standard conversions.

What a Complete Package Includes: Parts Breakdown

A full Sprinter body kit package typically consists of four to six components depending on the style tier you choose. Below is the standard breakdown we use across our Sport, Elegance and VIP kit lines.

• Front bumper - the primary visual element; available in sport, elegance, VIP and facelift styles with provision for parking sensors and fog lights
• Front grille - AMG-style diamond, star pattern, debadged or D-style; most of our W907 front bumper packages include a matching grille as a gift item
• Side skirts - left and right sill extensions; ABS plastic; designed to follow the van body line without protruding beyond legal ground clearance limits
• Rear bumper - sport or VIP style; some variants include an integrated diffuser; others are sold as a diffuser add-on to retain the OEM bumper
• Roof spoiler - optional; adds visual height balance and can integrate a light bar position
• Arch flares - optional on widebody configurations; bolt-on ABS units for W907

Our Mercedes Sprinter W907 W910 Full Body Kit with Diamond Front Grille is our most popular matched package for the VS30 generation, combining front bumper, grille, side skirts and rear bumper in a single order with unified panel design.

Material Options: ABS Plastic vs Fiberglass/FRP

We offer two primary material options across our Sprinter kit range, and each has a distinct purpose.

ABS plastic is our recommended choice for most buyers. It is impact-resistant, holds paint exceptionally well, flexes slightly on low-speed contact rather than cracking, and arrives ready for primer and paint. ABS parts have tighter dimensional tolerances, which means better OEM-style fitment straight from the box.

Fiberglass (FRP) is lighter than ABS and suits competition or showcase builds where weight reduction is a priority. FRP requires more surface preparation before painting and is more susceptible to cracking on impact. We recommend FRP for vans that will not see regular urban parking stress.

Both materials are supplied paint-ready. We also offer parts pre-painted to your specification - simply provide your Mercedes paint code when ordering, and we match it before dispatch.

Parking Sensors, ADAS and Sensor Cutouts

Modern W907 and W910 Sprinters carry front and rear parking sensors, and many post-2019 vans are equipped with ADAS features including forward collision warning cameras mounted in or near the front bumper assembly. Fitting an aftermarket bumper that blocks a camera or omits sensor holes can disable safety systems and trigger dashboard warnings.

Our sport and facelift-style W907 front bumpers are designed with pre-cut or pre-marked holes for OEM parking sensors. The bumper listed at our W907 Sport Front Bumper 2018-2025 page explicitly accommodates parking sensors and fog lights, and includes a matching front grille. Always verify camera bracket compatibility with your specific van trim level before installation.

TUV Certification and Road Legality

Road legality for aftermarket body parts varies significantly between markets. In Germany and across much of continental Europe, authorities may require a TUV certificate or type-approval document for structural exterior parts during roadworthiness inspections (HU/AU in Germany, controle technique in France, MOT in the UK).

DL Auto Design holds TUV certificates for selected parts in our range. These certificates confirm the part meets defined safety and structural requirements for road use. When a product page states TUV certification, the document is available on request. Non-certified decorative parts such as grilles and spoilers generally do not require certification but should be installed without obstructing lights, number plates or ventilation.

In the United States, FMVSS (Federal Motor Vehicle Safety Standards) govern lighting and bumper height rather than individual component certification. Buyers should confirm that any replacement bumper maintains legal light positions and does not lower the van beyond minimum ground clearance for their state. In South Korea, Ministry of Land, Infrastructure and Transport (MOLIT) regulations apply; we recommend buyers consult a local tuning shop for registration paperwork after installation.

Painting, Prep and Installation

All our body kit parts arrive either unpainted (raw ABS or FRP, ready for primer) or factory-painted to your Mercedes colour code. If you choose unpainted parts, follow this preparation sequence for best adhesion.

1. Wash the part in warm water with mild detergent; dry fully
2. Sand lightly with P400-grit paper to remove any mould release agent
3. Apply a plastic adhesion promoter to all painted surfaces
4. Apply two coats of high-build automotive primer; sand with P600 between coats
5. Apply your base colour coat; finish with two coats of 2K clear lacquer

Professional bodyshops in Germany, the Netherlands and the UK typically charge 4-8 hours of labour for a full front bumper swap including painting. In the US, labour rates vary widely by state. Installation of side skirts adds roughly 2-4 hours. We recommend a bodyshop familiar with commercial vans for accurate sensor recalibration after bumper replacement.

Shipping, Customs and VAT for US and European Buyers

We ship worldwide from Lithuania, which sits in the heart of the EU single market. Shipping typically takes 5-10 business days to most European destinations and 10-20 business days to the US, South Korea and other international markets.

EU buyers: Standard Lithuanian VAT applies at checkout. Buyers in other EU member states may be eligible for VAT adjustments depending on business registration status.

Non-EU buyers including the US, UK and South Korea: We apply 0% VAT on qualifying exports, which is a meaningful cost saving on larger kit orders. US buyers are responsible for any applicable import duties under the current HTS tariff schedule; full kit packages typically enter under Chapter 87 automotive parts codes. We provide accurate commercial invoices and HS codes to simplify customs clearance.

Large kit packages ship via freight pallet for protection. Smaller individual parts such as grilles and spoilers ship in reinforced cardboard with internal foam bracing. Damage claims must be reported within 48 hours of delivery with photographic evidence.

Choosing the Right Style: Sport, Elegance and VIP Kit Lines

We offer three distinct aesthetic directions across our W907 full body kit range, each targeting a different buyer profile.

The facelift variants within each line are designed to match the revised front face Mercedes introduced on 2021 and later W907 production. If your van was built after mid-2021, order facelift-specific parts to ensure the bumper aligns correctly with the revised headlight housings and bonnet line.

Frequently Asked Questions

What is included in a complete Sprinter body kit package?

A complete package from DL Auto Design typically includes a front bumper, matching front grille, left and right side skirts, and a rear bumper. Roof spoilers and arch flares are optional add-ons. Most W907 Sport, Elegance and VIP packages include the grille as a gift item at no extra charge.

Will a W907 body kit fit my 2019-2026 VS30 Sprinter in the US?

Yes. The US-market VS30 Sprinter is the same platform as the European W907 and W910. Parts designed for W907 2018-2020 fit pre-facelift vans; parts marked facelift fit 2021-present models. Confirm your model year on the product page before ordering.

Do the front bumpers have cutouts for parking sensors?

Many of our W907 front bumpers include pre-cut or pre-marked holes for OEM parking sensor housings and fog lights. Check the individual product page for your chosen style - the Sport and Facelift bumpers explicitly state sensor compatibility.

Are TUV certificates available for Sprinter body kit parts?

Yes. DL Auto Design holds TUV certificates for selected parts in the range. The relevant product pages state when a certificate is available, and the document can be provided on request. This is particularly relevant for buyers in Germany and other EU markets subject to roadworthiness inspection.

Do I pay VAT if I am ordering from the US or South Korea?

No. Non-EU buyers including customers in the US, UK, South Korea and other countries outside the European Union qualify for 0% VAT on their orders from DL Auto Design. This is applied at checkout. Import duties in your destination country are the responsibility of the buyer.

What is the difference between ABS plastic and fiberglass body kit parts?

ABS plastic offers superior impact resistance, tighter dimensional tolerance and better everyday durability, making it the preferred choice for road use. Fiberglass (FRP) is lighter and suits show or competition builds. Both materials are supplied paint-ready and can be ordered pre-painted to your Mercedes colour code.

Can I order individual parts instead of a full kit package?

Yes. Every component in our full kit lines - front bumper, grille, side skirts, rear bumper and spoiler - is also available individually. This is useful if you are upgrading one section at a time or replacing a damaged part to match an existing kit.

A complete Mercedes Sprinter body kit package is the most efficient way to achieve a cohesive, professional exterior upgrade across W906, W907/VS30 and W910 generations. By ordering matched front, side and rear components from a single manufacturer, you eliminate fitment guesswork, reduce shipping complexity and ensure a unified finished appearance. At DL Auto Design, every kit is manufactured to generation-specific tolerances, available in ABS or fiberglass, and backed by TUV certificates on qualifying parts - with 0% VAT for US, UK, South Korean and other non-EU buyers and worldwide shipping included. Browse our full W907 and W910 kit range at dlautodesign.com to find the Sport, Elegance or VIP package that matches your build, or contact our team directly if you need fitment advice for a specific wheelbase or model year.