Our products
-
Information: Do Mercedes Sprinter Body Kits Come Painted?
Most aftermarket Mercedes Sprinter body kits ship unpainted, in the raw color of the base material, unless the product listing specifically states that a part is painted or primed. Confirm the exact finish for each part before you order, because a painted bumper, an unpainted grille and a primed side skirt can all appear in the same body kit range.
Painted, Primed and Unpainted: What Each Term Means
These three terms describe different stages of finish, and mixing them up is the most common source of confusion for buyers comparing a painted Sprinter body kit against an unpainted bumper kit.
- Unpainted: the part ships in the natural color of its material, for example black or grey ABS plastic, with no paint applied. This is sometimes listed as raw or unfinished.
- Primed: the part has a base primer coat applied to help paint adhesion, but the primer is not a final color and the part still needs a top coat before installation.
- Painted: the part has a finished color coat applied, usually matched to a specific color code supplied by the buyer or manufacturer.
A listing that does not mention any of these terms should not be assumed to be painted. Always check the product title, description and images before ordering.
Why the Paint Status Affects Your Order
If you plan your budget and timeline around a bumper arriving ready to bolt on, therefore assuming it is factory-matched, you may find the part actually arrives in raw material color. That gap between expectation and reality affects two things directly: total project cost, because painting is a separate line item, and installation timing, because painted parts need to be scheduled around a body shop's paint booth availability. Confirming the finish before you order removes this risk.
Color matching is a separate consideration from finish state. Even a part listed as painted only matches your Sprinter's factory color if you supplied the correct color code before the part was finished. Confirm the exact code with the seller rather than relying on a general color name.
How to Confirm the Finish Before You Buy
- Read the full product title and description for the words unpainted, primed, painted, gloss black or raw material.
- Check product photos for texture. Unpainted ABS plastic typically shows a uniform matte or satin plastic surface rather than a glossy painted finish.
- If the listing does not state the finish, contact the seller directly and ask before ordering.
- If you need a painted part, confirm whether you must supply a factory color code and how that code should be provided.
- Ask whether the part is primed only, since primed parts still require a final top coat before installation.
For example, the Mercedes Sprinter W907 Front Grille Debadged Unpainted Copy is listed explicitly as unpainted, so a buyer knows in advance that painting is a separate step. Other body kit parts, such as the Mercedes Sprinter Tuning Front Bumper W907, should be checked individually for finish state before you order, since paint status can vary by product and by production batch.
Common Mistakes Buyers Make
- Assuming every part in a full body kit ships in the same finish. A bumper and a grille sold together are not always finished the same way.
- Ordering a painted part without confirming the exact color code, which risks a visible mismatch against the rest of the van.
- Skipping a check on primed parts and installing them without a final top coat, leaving the surface unprotected.
- Not asking who is responsible for painting labor and cost when the part ships unpainted.
Decision Checklist Before You Order
- Does the listing state unpainted, primed or painted for this specific part.
- If painted, has a factory-accurate color code been confirmed with the seller.
- If unpainted or primed, has your body shop confirmed availability and cost for finishing before installation.
- Does your installation timeline allow for painting time before the van needs to be back in service.
- Have you confirmed the finish state for every part if you are ordering a multi-piece kit, since bumpers, grilles and side skirts may not match in finish.
Frequently Asked Questions
What does unpainted mean for a Sprinter body kit part?
Unpainted means the part ships in the raw color of its base material, such as black or grey ABS plastic, with no paint coat applied. You or your body shop will need to prepare and paint the part separately before or after installation.
Can I paint an unpainted ABS plastic Sprinter bumper myself?
Painting flexible plastic automotive parts is possible but requires the correct preparation and paint products for plastic surfaces. Ask a professional body shop about the correct process for your specific part before attempting it yourself.
What is a primed body kit part, and is it ready to install?
A primed part has a base coat applied to help paint adhesion, but it is not a finished color and still needs a top coat before installation. Treat a primed part the same as an unpainted one when planning your paint budget and timeline.
Will a painted Sprinter body kit part match my van's factory color exactly?
Only if you supplied the exact factory color code to the seller before the part was painted. Confirm the color code process directly with the seller rather than assuming a general color name will produce a factory-accurate match.
Does DL Auto Design sell any Sprinter parts that are explicitly unpainted?
Yes. The Mercedes Sprinter W907 Front Grille Debadged Unpainted Copy is listed as unpainted, meaning it ships in raw material color and requires separate painting if you want a color-matched finish.
Do not assume a Sprinter body kit part is painted unless the listing says so. Check each product for the words unpainted, primed or painted, confirm color codes for painted parts, and plan paint shop time and cost for unpainted or primed pieces before you place an order.