Front Lip vs Full Body Kit for Mercedes Sprinter: Function and Looks

Information: Front Lip vs Full Body Kit for Mercedes Sprinter: Function and Looks

A front lip changes only the lower edge of the Sprinter's front bumper, while a full body kit combines the front bumper, side skirts, rear bumper and often the grille into one coordinated design that changes the van's entire profile. The right choice between a front lip vs full body kit for your Sprinter depends on how much of the exterior you want to change and how many panels you are prepared to fit and color-match.

What a Front Lip Changes on a Sprinter

A front lip or splitter is typically the smallest styling addition in a body kit range. It attaches along the lower edge of the front bumper and alters only that lower line of the front end. It does not touch the side skirts, rear bumper or grille, so the rest of the van keeps its existing look. Because a lip involves a single panel, it narrows the color-matching task to that one part and the bumper it mounts to, rather than several panels across the van.

What a Full Body Kit Changes on a Sprinter

A full body kit combines several exterior components into one design language. For the Sprinter, that generally means a front bumper, side skirts and rear bumper, sometimes paired with matching grille and roof spoiler pieces such as the W907/W910 full body kit grille. Because a full kit covers the front, sides and rear of the van, it changes how the whole vehicle reads rather than just the lower edge of the bumper.

Function Comparison

Looks: Visual Impact Compared

A front lip is a detail change. It sharpens the lower line of the front bumper without altering the Sprinter's overall stance or side profile. A full body kit reads as a more complete transformation because the front bumper, side skirts and rear bumper are designed to work together; components such as side skirts for the W907 Sprinter extend that same design line along the length of the van. Buyers who want a light refresh for a working van often stop at bumper-level changes, while buyers building an executive or VIP-spec Sprinter typically combine front, side and rear pieces so the van reads as one design from every angle.

Compatibility Pitfalls to Check Before Ordering

Mercedes-Benz technical guidance states that bumper modifications must account for the vehicle's exact parking sensor, radar and camera configuration. This applies whether you fit a single lip panel or a full kit: confirm the sensor cutouts and camera mounting points on the exact bumper you select before ordering.

Model series also matters. The Mercedes-Benz Vans Upfitter Portal identifies the 2019-present Sprinter as model series 907, distinct from the earlier W906 generation, and DL Auto Design lists separate parts for each. Front lip-level parts and full body kit components are not interchangeable between W906 and W907, so confirm your van's model series before ordering either option.

Wheelbase and roof height are a separate check from model series. A full body kit touches more of the van's length than a single lip panel, so confirm that each individual component, not just the general model series, fits your specific Sprinter configuration.

Decision Checklist

• Do you want to change only the lower front line, or the van's whole profile? This points toward a lip versus a full kit.
• Does your Sprinter have factory parking sensors, radar or a front camera? Confirm the exact sensor layout for whichever bumper you choose.
• Is your van W906 (pre-2019) or W907 (2019-present)? Confirm the model series before ordering either option.
• Do you plan to add side skirts or a rear bumper later, or fit everything at once? Decide whether buying components separately or as a coordinated set fits your project.
• How many panels are you prepared to paint-match? One panel for a lip, several for a full kit.

Frequently Asked Questions

What is the main functional difference between a front lip and a full body kit?

A front lip changes only the lower edge of the front bumper, while a full body kit combines the front bumper, side skirts, rear bumper and often the grille into one coordinated design that changes the van's full profile.

Can I install a front lip now and add the rest of a body kit later?

DL Auto Design lists front bumpers, side skirts, rear bumpers and grille pieces as separate products, so components can generally be selected individually and added over time. Confirm that later additions match the model series and finish of parts you already have.

Will a full body kit affect my Sprinter's parking sensors or camera?

Bumper and body panel changes must account for the van's exact parking sensor, radar and camera configuration per Mercedes-Benz technical guidance. Confirm sensor and camera compatibility for the specific bumper or kit component before ordering, since this is not guaranteed for every listing.

Are front lip and full body kit parts interchangeable between W906 and W907 Sprinters?

No. The Mercedes-Benz Vans Upfitter Portal identifies the 2019-present Sprinter as model series 907, distinct from the earlier W906 generation, and DL Auto Design lists separate parts for each. Confirm your van's model series before ordering either a lip-level part or a full kit.

Does a full body kit require repainting the whole van?

Not necessarily the whole van, but a full kit typically adds more painted panels, such as the front bumper, side skirts and rear bumper, than a single lip piece, which means more surfaces to prep and color-match to the factory finish.

A front lip suits a targeted, single-panel refresh of the Sprinter's front end. A full body kit suits a complete profile change across the front, sides and rear. Match your choice to how much of the van's look you want to change, confirm sensor and model-series compatibility for every panel, and compare DL Auto Design's Sprinter front bumper, side skirt and full body kit listings for your exact W906 or W907 configuration.