Our products
-
Information: Maxton vs Vansports Sprinter Aero Parts: Front Splitter and Side Skirts
Maxton and Vansports both list front splitters and side skirts for the Mercedes-Benz Sprinter, but neither brand publishes one spec sheet that lets you compare material, generation fitment and certification status side by side. The practical way to choose between them is to match each individual listing to your exact Sprinter generation, W906 or W907, and to your van's sensor configuration, then weigh the same criteria against alternative manufacturers such as DL Auto Design before ordering.
Front Splitter and Side Skirts: What These Parts Are
A front splitter is a lower front-end add-on panel that extends the bumper's lower edge, usually fitted below or in front of the existing bumper lip. Side skirts are panels fitted along the rocker area between the front and rear wheel arches. Both are styling additions to the existing bumper and rocker panel rather than replacements for the whole panel, unless the listing specifically states it is a full bumper.
Why Brand Name Alone Does Not Answer the Fitment Question
The Mercedes-Benz Vans Upfitter Portal identifies the Sprinter built from 2019 to present as model series W907, and the earlier Sprinter as W906. A splitter or side skirt shaped for the W906 bumper and rocker profile will not correctly follow the W907 lines, and the reverse is also true. Therefore, the first filter when comparing Maxton and Vansports listings is not brand reputation, it is whether the specific listing states coverage for your Sprinter's exact generation and model years.
Criteria to Compare Before You Choose a Brand
Criterion Why it matters What to confirm on the listing Generation fitment W906 and W907 bumpers and rockers differ in shape Exact model-year range stated by the seller Material Affects handling, repair and paint prep Material type as stated on that specific product page Sensor and camera clearance Sprinter bumpers can carry parking sensors, radar or camera hardware Whether the listing addresses your van's sensor configuration Certification documentation Road-legality paperwork requirements vary by country Whether TUV or equivalent documentation is offered for your market Finish Some parts ship primed, others gloss or unpainted Finish stated before you plan paint work Returns and warranty Affects recourse if a part does not fit correctly Seller's stated return policy for that product Trade-offs to Weigh
A brand with a wide multi-model catalog can make it easier to find a listing quickly, but a large catalog by itself is not proof that a specific splitter or side skirt accounts for your van's parking sensors or camera position. Therefore, treat the individual product listing, not the brand's general marketing copy, as the source you rely on before ordering.
DL Auto Design's Sprinter Side Skirts and Front Bumper Options
DL Auto Design, based in Panevezys, Lithuania, lists generation-specific Sprinter side skirts rather than a single universal part: the Mercedes Sprinter Tuning Side Skirts W906 for the pre-2018 body and the Mercedes Sprinter Tuning Side Skirts W907 Abs Plastic 2020 for the 2019-present body. On the front end, DL's W907 range currently consists of full replacement bumpers, including Classic, New and Facelift versions, rather than a bolt-on splitter. If your comparison with Maxton or Vansports is specifically about a standalone front splitter, confirm whether you actually need a replacement bumper or an add-on splitter before comparing formats, since the two are not interchangeable upgrades.
Sensor and ADAS Considerations
Mercedes-Benz technical guidance states that any bumper modification must account for the vehicle's exact parking sensor, radar and camera configuration. This applies regardless of brand. Confirm sensor and camera placement against the specific product listing, whether it comes from Maxton, Vansports or DL Auto Design, rather than assuming compatibility from a general product photo.
Frequently Asked Questions
Can a Maxton or Vansports side skirt made for W906 fit a W907 Sprinter?
No. The W906 and W907 Sprinter have different rocker and bumper profiles per Mercedes-Benz's own model series designations. Always match the listing's stated model years to your van before ordering.
Does DL Auto Design sell a standalone front splitter for the Sprinter?
DL Auto Design's current Sprinter W907 front-end lineup consists of full replacement bumpers such as Classic, New and Facelift, not an add-on splitter. Check the individual bumper listing to see the exact design before comparing it to a bolt-on splitter from another brand.
Will a front splitter or side skirt affect my Sprinter's parking sensors?
It can, depending on where the sensors sit on your specific bumper. Confirm sensor and camera placement against the exact product listing before ordering, since this is a vehicle-specific check rather than a brand-wide guarantee.
Is TUV certification included with every Sprinter splitter or side skirt?
Certification and documentation vary by product and by seller, and none is confirmed here for Maxton or Vansports Sprinter splitters or side skirts specifically. Ask the seller directly whether TUV or equivalent paperwork is provided for your market.
What is the most reliable way to compare Maxton, Vansports and DL Auto Design parts?
Compare the same criteria on each individual listing: generation fitment, material, sensor clearance, certification status, finish and return policy. Brand name alone does not confirm any of these details for your specific Sprinter.
Choosing between Maxton and Vansports front splitters or side skirts for the Sprinter comes down to matching each specific listing to your van's generation and sensor configuration, not to brand reputation alone. If you would rather work from a generation-specific side skirt listing or a full replacement front bumper, review DL Auto Design's Sprinter W906 and W907 product pages and confirm fitment for your exact VIN and configuration before ordering.