Mercedes Sprinter Styling Kit: Front, Side and Rear Upgrade Packages

Information: Mercedes Sprinter Styling Kit: Front, Side and Rear Upgrade Packages

A Mercedes Sprinter styling kit is a coordinated set of exterior parts - front bumper, side skirts, rear bumper or diffuser, and grille - engineered to transform a stock van into a distinctive, professional-looking vehicle in a single ordered package. At DL Auto Design we manufacture and sell these upgrade packages for both the W906 (2006-2018) and the current W907/VS30 (2018-2025) generations, with parts available in ABS plastic or fiberglass/FRP, paint-ready or fully painted, and with worldwide shipping to the US, Europe and beyond.

What Is a Sprinter Styling Kit and What Does It Include?

A styling kit - sometimes called a body kit or exterior upgrade package - groups the most visible panels of the van into one purchase. A full front-side-rear package for the Sprinter typically covers the front bumper assembly, a grille upgrade, side skirts running the length of the body, a rear bumper or diffuser add-on, and optionally a roof spoiler or arch flares. Buying these parts as a coordinated kit guarantees consistent design language, matching surface texture, and compatible mounting geometry across all three zones of the vehicle.

Partial kits are equally valid. Many operators prioritize the front end first because that is the first impression the van makes - on clients, on camera, and on the road. Others start with side skirts to lower the visual center of gravity before adding front and rear pieces. We design every component so it can be ordered individually or as part of a staged build over time.

Generation and Fitment: W906 vs W907/VS30 vs W910

Fitment is the single most important variable when ordering Sprinter exterior parts. Mercedes changed the front end architecture, sensor layout, and bumper mounting points significantly between the W906 and the W907. Parts are not interchangeable between generations.

Wheelbase also matters for side skirts and sill extensions. We offer fitment for L1 (short), L2 (standard), L3 (long), and L4 (extra-long) wheelbases. Always confirm your wheelbase before ordering side panels.

Front End Upgrades: Bumpers and Grilles

The front bumper is the anchor of any Sprinter styling kit. Our W907 lineup includes sport, elegance, VIP, and facelift design variants - each engineered with integrated provisions for parking sensors, fog lamps, and front camera cut-outs so that your existing ADAS hardware remains fully functional after fitment.

One of our most popular options is the Mercedes Sprinter W907 Sport Front Bumper (2018-2025), which includes pre-cut parking sensor ports, integrated fog light housings, and a complimentary front grille in the package price - making it a practical all-in-one front end solution. If you prefer a subtler facelift aesthetic that mirrors the post-2021 MY face, our W907 Front Bumper Facelift (2018-2025) delivers that look with the same sensor and fog light compatibility.

Grille choices for the W907 range from AMG-style diamond mesh and star-pin designs to fully debadged smooth-face units favored by operators who want a clean, private-plate appearance. For W906 owners, we offer matching front bumpers and grilles that upgrade the older face to a sharper, more contemporary look without a full generation conversion.

Side Skirts: Visual and Aerodynamic Ground Effect

Side skirts serve two purposes: they visually lower the van and they reduce the turbulent air that passes under the body at highway speed. Our ABS plastic side skirts for the W907 (2020-on) are vacuum-formed to follow the factory body line precisely, meaning installation gaps are minimal and no cutting of the original body is required. W906 side skirts follow the same design philosophy with generation-specific mounting brackets.

For US customers ordering VS30 skirts: the panels ship in one piece per side for short and standard wheelbase, and in matched multi-piece sets for L3/L4. Customs duties on polymer body panels entering the US are typically low, and our team provides full commercial invoices and HS code documentation to streamline clearance.

Rear End Upgrades: Bumpers and Diffusers

The rear bumper is often the most neglected part of a Sprinter build, yet it is visible every time the van is parked or unloaded. Our W907 rear bumper range includes the Tuning Rear Bumper W907, the VIP Rear Bumper with integrated lower diffuser fins, and a standalone diffuser add-on that mounts below the stock rear bumper for those who want aerodynamic styling without replacing the OEM unit. All rear parts are designed to clear the factory step and tow bar provisions.

For W906 operators, the Tuning Rear Bumper W906 provides a substantially sportier lower valance compared to the utilitarian stock item, and it is available in both ABS and fiberglass depending on your weight and finish preferences.

Full Body Kits: Diamond and Roof Spoiler Packages

If you want the complete transformation in one order, our W907/W910 full body kit packages bundle front grille, side elements, and roof spoiler into a single shipment. The Diamond Kit uses a diamond-mesh grille as its visual centerpiece, while the Roof Spoiler Package emphasizes the roofline with an integrated spoiler and light bar mount. Both kits are available with 0% EU VAT for buyers outside the European Union - a meaningful saving on premium-grade fiberglass parts.

Materials: ABS Plastic vs Fiberglass/FRP

We offer most parts in two material options, and the right choice depends on your use case.

• ABS plastic: Impact-resistant, dimensionally stable in temperature extremes, easier to repair with heat after minor contact damage, and ideal for daily-use commercial vans. Most of our TUV-certified parts are produced in ABS.
• Fiberglass/FRP: Lighter weight, preferred for show builds or conversions where panel weight matters, and slightly easier to cut and modify for custom applications. Requires more careful handling during fitting to avoid stress cracks at mounting holes.

Both materials are supplied paint-ready with a smooth primer-compatible surface. We also offer parts in painted finish to your Mercedes paint code on request - eliminating the need for a body shop spray prior to fitment.

Paint, Sensors, and ADAS Compatibility

Every bumper we manufacture that is designed for the W907/VS30 generation includes provisions for the factory active parking sensor system. The sensor holes are pre-drilled or pre-marked, and the foam backing behind the bumper skin is shaped to accept OEM sensor brackets. If your van has the optional front camera (available on US VS30 models from certain trim levels), confirm this at order so we supply the correct camera aperture variant.

Paint preparation is straightforward on both ABS and fiberglass: scuff, flex primer, two-stage base and clear, or single-stage depending on your shop. We supply material data sheets with each order confirming the correct primer adhesion protocol for the material supplied.

TUV Certification and Road Legality in Europe and the US

Road legality varies by market. In Germany and most EU member states, aftermarket bumpers that alter the front crash structure require documentation or type approval. A significant portion of our front bumpers and splitters carry TUV certificates, which we supply as PDF documents with the shipment. These certificates confirm that the part has been independently tested for compliance with relevant EU construction standards, making the registration process with your local authority straightforward.

In the United States, federal regulations for bumper replacement on commercial vans are less prescriptive than EU rules, but state-level inspection requirements vary. Our team can advise on documentation for your specific state on request.

Ordering, Shipping, and VAT for US and European Buyers

We ship worldwide from Lithuania. Standard transit to Western Europe is 3-7 business days by road freight or express courier. US shipments typically arrive within 7-14 business days depending on the carrier selected and customs processing time. Large bumper panels ship in custom foam-lined crates to prevent damage in transit.

For buyers outside the European Union - including all US customers and South Korean importers - we apply 0% VAT on all orders. This makes our prices directly comparable to local market options without a hidden 21% EU VAT surcharge. Import duties on the US side for polymer automotive parts are generally modest; we provide accurate HS codes and commercial documentation with every shipment to support smooth customs clearance.

Returns are accepted for unmodified, unpainted parts within the stated return window. Painted or modified parts are non-returnable, so we recommend ordering paint-ready parts first, verifying fitment, and then proceeding to paint.

Choosing the Right Package: A Quick Decision Guide

1. Confirm your generation: W906 (pre-2018) or W907/VS30 (2018-2025) or W910.
2. Check your wheelbase: L1, L2, L3, or L4 - critical for side skirts and sill extensions.
3. Identify sensor/camera options fitted to your van before selecting a front bumper.
4. Choose material: ABS for daily use; fiberglass/FRP for show or weight-sensitive builds.
5. Decide on finish: paint-ready (you paint locally) or painted to code (we paint before shipping).
6. Select scope: front only, front and grille, front-side-rear, or full kit including roof spoiler.

Frequently Asked Questions

Does a Mercedes Sprinter styling kit fit all wheelbase variants?

Front bumpers and grilles fit all wheelbases within a generation because the front end dimensions are the same. Side skirts and rear sill extensions are wheelbase-specific - L1/L2 and L3/L4 are different parts. Always state your wheelbase when ordering side or rear panels.

Will an aftermarket front bumper disable my Sprinter parking sensors or front camera?

Not if you order the correct variant. Our W907/VS30 front bumpers are engineered with pre-drilled or pre-marked sensor positions and camera apertures matching the OEM layout. Confirm which sensors and camera options are fitted to your specific van at the time of ordering.

Do I need a TUV certificate for a new front bumper in Germany?

In Germany and most EU countries, replacing the front bumper with an aftermarket unit that alters crash geometry typically requires documentation. Many of our bumpers come with TUV certificates supplied as PDF documents. Check the specific product page and contact us if you need certificate confirmation before purchase.

What is the difference between ABS plastic and fiberglass Sprinter body kit parts?

ABS is impact-resistant and temperature-stable, making it ideal for commercial daily-use vans. Fiberglass/FRP is lighter and preferred for show or conversion builds. Both materials are paint-ready. TUV-certified parts are generally produced in ABS.

Do US buyers pay EU VAT on Sprinter body kit orders?

No. Buyers outside the European Union - including all US and South Korean customers - pay 0% VAT. The price shown is the full price with no EU VAT added, making DL Auto Design parts cost-competitive even after international shipping.

Can I order a front bumper for a W906 Sprinter and a W907 grille together?

No - W906 and W907 front ends are completely different in geometry and mounting. Parts from one generation do not fit the other. Order all front end components from the same generation line to ensure compatibility.

How long does shipping to the United States take?

US shipments typically arrive within 7-14 business days depending on the carrier and customs processing time. Large panels ship in foam-lined crates to prevent transit damage. We provide full commercial invoices and HS code documentation to support US customs clearance.

A well-specified Mercedes Sprinter styling kit - matched to your generation, wheelbase, sensor configuration, and finish requirements - is the most efficient way to differentiate a stock van and reinforce a professional or luxury brand image. At DL Auto Design we manufacture every component in Lithuania to consistent quality standards, with TUV-certified options, ABS and fiberglass material choices, worldwide shipping, and 0% VAT for non-EU buyers including all US customers. Whether you are upgrading the front end only or commissioning a full front-side-rear package for a VS30 or W906, browse the complete Sprinter body kit range at dlautodesign.com and contact our team to confirm fitment before you order.