Mercedes Sprinter vs Volkswagen Crafter Body Kits: What Fits and What Does Not | DL Auto Design
Published: September 22, 2026
  • Information: Mercedes Sprinter vs Volkswagen Crafter Body Kits: What Fits and What Does Not

    ▼
    Mercedes Sprinter vs Volkswagen Crafter Body Kits: What Fits and What Does Not

    A Sprinter vs Crafter body kit comparison comes down to one fact: the two vans are different platforms from different manufacturers, so bumpers, grilles and side skirts made for one will not fit the other. Each range is also split into distinct generations, Mercedes Sprinter W906 and W907, and Volkswagen Crafter's first generation versus the current Crafter/MAN TGE platform, so even a part made for the right van can be wrong for your specific year. This guide sets out what actually fits, what does not, and how to check before you order.

    Sprinter and Crafter Are Different Vans, Not Variants

    Mercedes-Benz builds the Sprinter and Volkswagen builds the Crafter. They compete in the same size class but are separate engineering programs, so exterior parts are not shared between them. The Mercedes-Benz Vans Upfitter Portal identifies the current Sprinter as model series W907, produced from 2019, with the same series covering the 2023-present eSprinter. The prior Sprinter generation is referred to as W906. Volkswagen's Crafter catalog at DL Auto Design is split into a first-generation range, with listings referencing production years up to 2017 or 2018, and a current-generation range that is sold jointly with the MAN TGE, since several bumper, headlight trim and rear spoiler parts are listed for both vans together.

    Why Sprinter and Crafter Body Kits Are Not Cross-Compatible

    A bumper, grille or side skirt is shaped to one manufacturer's body panels and mounting points. Sprinter and Crafter differ in body width, headlight and grille layout, and bumper attachment design, so a part built for a Sprinter W907 cannot be adapted to a Crafter or MAN TGE, and the reverse is also true. This applies across generations as well: a Sprinter W906 bumper is not shaped for a W907 van, and a first-generation Crafter part is not shaped for the current Crafter or MAN TGE.

    Sensor configuration adds a further layer of complexity. Any front or rear bumper change must account for the vehicle's actual parking sensor, radar and camera setup. This principle applies separately to each van and each model year, so confirm your own configuration against the product listing rather than assuming compatibility from the vehicle class alone.

    Sprinter vs Crafter Generations at a Glance

    VanManufacturerGenerations in DL Auto Design catalogNotes
    Mercedes SprinterMercedes-BenzW906 (pre-2019) and W907 (2019-present, per Mercedes-Benz Vans Upfitter Portal)Bumpers, grilles, side skirts and full body kits are listed separately per generation; several W907 bumpers are further split into pre-facelift and facelift designs.
    Volkswagen CrafterVolkswagenFirst generation (listings reference 2006-2017/2018) and current generationCurrent-generation bumper, headlight trim and rear spoiler parts are listed jointly with the MAN TGE.
    MAN TGEMANSold alongside the current CrafterSeveral DL Auto Design listings cover Crafter and MAN TGE together; confirm your exact chassis code and production year before ordering.

    Buyer Checklist Before Comparing Sprinter and Crafter Parts

    • Confirm the manufacturer and model first: Sprinter, Crafter or MAN TGE are not interchangeable regardless of similar size and shape.
    • Confirm the generation or model code: Sprinter W906 versus W907, or Crafter first-generation versus current-generation/TGE.
    • Match your production year against the year range stated in the product listing, not just the general model name.
    • Check whether your current bumper already carries parking sensors, radar or camera fittings, and confirm the replacement part's sensor provision matches your van's actual configuration.
    • On current Sprinter and Crafter ranges, check whether you need a pre-facelift or facelift bumper shape, since both are listed separately where available.

    Who Each Range Suits

    Sprinter W907 owners have the widest selection at DL Auto Design, including trim-style bumpers such as Sport, Elegance and VIP designs, plus separate facelift and sensor-equipped bumper listings. Crafter and MAN TGE owners have a smaller, largely joint range covering front bumpers, splitters, headlight trim and rear bumper add-ons, so confirming the chassis code before ordering matters more on this platform. Owners of an older Sprinter W906 or a first-generation Crafter (2006-2017/2018) need to use the dedicated legacy listings for those generations rather than current-model parts.

    Verified DL Auto Design Options

    For current Sprinter W907 vans, the Mercedes Sprinter Tuning Front Bumper W907 is listed for this generation. For Crafter and MAN TGE vans, the Volkswagen Crafter and MAN TGE front bumper splitter spoiler lip is listed jointly for both vans. Confirm your exact model, generation and production year against each listing before ordering.

    Frequently Asked Questions

    Can I fit a Sprinter body kit on a Volkswagen Crafter?

    No. Sprinter and Crafter are separate platforms from different manufacturers with different body dimensions and mounting points, so bumpers, grilles and side skirts are not interchangeable between them.

    Do MAN TGE body kit parts fit every Volkswagen Crafter?

    Not automatically. DL Auto Design lists several current-generation bumper, headlight trim and rear spoiler parts jointly for Crafter and MAN TGE, but first-generation Crafter parts (referenced for 2006-2017/2018) are a separate range, so confirm your exact chassis code and production year first.

    What is the difference between Sprinter W906 and W907 parts?

    W906 and W907 are different Sprinter generations with different bumper, grille and body shapes. DL Auto Design lists them as separate product ranges, so confirm which model series your van belongs to before choosing a part.

    Will changing the front bumper affect my parking sensors or camera?

    Bumper modifications must account for the vehicle's actual parking sensor, radar and camera configuration. Confirm your specific setup against each product listing, and note that only bumpers explicitly described with parking sensor provision are designed for sensor-equipped vans.

    Are Sprinter and Crafter body kit parts sold already painted or road-certified?

    Finish and certification details vary by part and are not assumed across the range. Check each product listing directly for paint finish and certification information before ordering.

    Sprinter and Crafter body kits are separate ranges built around separate platforms, so the safe path is to confirm manufacturer, generation, production year and sensor configuration before comparing prices or styles. Once you have those details, review the Sprinter W907 or Crafter/MAN TGE listings above and check the exact product page for fitment notes specific to your van.

« back