Mercedes Sprinter W906 vs W907 Body Kits: What Changed?

Information: Mercedes Sprinter W906 vs W907 Body Kits: What Changed?

W906 and W907 are two different Mercedes-Benz Sprinter generations, and their body kit parts are not interchangeable. W907 is the model series that Mercedes-Benz's Upfitter Portal assigns to the 2019-present Sprinter, including the 2023-present eSprinter, while W906 is the designation used across the aftermarket, including DL Auto Design's own catalog, for the Sprinter body style that came before this update. Before ordering a bumper, grille or side skirt kit, confirm which generation, and which facelift stage, your van belongs to.

W906 vs W907: What the Model Codes Mean

Mercedes-Benz's Upfitter Portal identifies the 2019-present Sprinter, including the 2023-present eSprinter, under the model series 907. W906 is not part of that official 907 documentation; it is the code used in the aftermarket, and in DL Auto Design's product names, to separate the earlier Sprinter body design from the 2019-update platform. Because these are two distinct vehicle generations, every exterior body kit part is designed and sold separately for each one.

Body Kit Differences Between W906 and W907

The 2019 platform update changed the Sprinter's front-end layout, so front bumpers, grilles and headlight surrounds sold for the W906 generation do not match the mounting points or panel lines of a W907 van, and vice versa. Rear bumpers, side skirts and arch trim are also generation-specific. This is why DL Auto Design lists W906 and W907 parts as separate product lines rather than a single universal kit.

DL Auto Design Body Kit Parts by Generation

Use this table only as a guide to what DL Auto Design currently lists per generation. Always confirm the exact fitment note on the product page for your van's model year before ordering, for example the Mercedes Sprinter Tuning Front Bumper W906 ABS Plastic or the Mercedes Sprinter Classic Bumper W907, 2018 to present model.

Facelift Variants Within W907

The W907 generation itself is not a single unchanged design throughout its production run. DL Auto Design's catalog includes a separate front bumper listed specifically as a facelift version, alongside earlier W907 bumper styles such as the classic bumper and the new front bumper. This means two W907 vans can still need different front-end parts depending on whether they are pre-facelift or facelift. Confirm the facelift status of your specific van, not just the W907 designation, before ordering a front bumper or grille.

Are W906 and W907 Body Kit Parts Interchangeable?

No. A W906 front bumper, rear bumper, grille or side skirt is built to match the panel lines and mounting points of the pre-2019 body design, and a W907 part is built for the 2019-present platform. Mixing parts between the two generations is not a supported option in DL Auto Design's catalog. If you are unsure which generation your van is, verify this before ordering rather than assuming based on appearance alone.

Sensor and Camera Considerations

Bumper modifications must account for the vehicle's exact parking sensor, radar and camera configuration, and this applies to both W906 and W907 vans. Some W907 front bumper listings state that they are designed with parking sensor cutouts; this is a product-specific detail and should be confirmed against your van's actual sensor layout before you order, rather than assumed for every bumper in the range.

How to Confirm Your Sprinter Generation Before Ordering

• Check your van's documentation or VIN details to identify the model year and series.
• Compare your current front bumper and grille shape against the product photos for W906 versus W907 parts.
• Note whether your W907 van is pre-facelift or facelift, since bumper styles differ between the two.
• Contact DL Auto Design with your model year and, if possible, photos of your front and rear bumper before ordering a body kit part.

If your van is the newer platform, browse the Mercedes Sprinter W907 Front Bumper Facelift alongside earlier W907 bumper styles to match the correct stage of your van.

Frequently Asked Questions

What does W906 mean for the Sprinter?

W906 is the code used in the aftermarket, and in DL Auto Design's catalog, for the Sprinter generation that came before the 2019 platform update. It is not part of Mercedes-Benz's 907 Upfitter Portal documentation.

What does W907 mean for the Sprinter?

W907 is the model series that Mercedes-Benz's Upfitter Portal assigns to the 2019-present Sprinter, including the 2023-present eSprinter. It covers multiple facelift stages, so body kit parts still vary within this generation.

Can I use a W906 body kit on a W907 van?

No. W906 and W907 have different front and rear panel designs and mounting points, so body kit parts built for one generation do not fit the other.

How do I know if my Sprinter is W906 or W907?

Check your van's model year and VIN documentation, and compare your current bumper and grille shape against the product photos listed for each generation. If you are unsure, contact DL Auto Design with your model year before ordering.

Does a W907 facelift need a different body kit than the pre-facelift W907?

Yes, in some cases. DL Auto Design lists a facelift-specific front bumper separately from earlier W907 bumper styles, so confirm your van's facelift status in addition to its W907 designation before ordering.

W906 and W907 are separate Sprinter generations with separate body kit parts, and within W907 the facelift stage can also change which bumper or grille fits. Confirm your van's model year, generation and facelift status before ordering, then review the matching W906 or W907 parts in DL Auto Design's catalog.