2019-2026 Sprinter Body Kit: Short, Long and Extended Wheelbase Fitment

Information: 2019-2026 Sprinter Body Kit: Short, Long and Extended Wheelbase Fitment

A 2019 Sprinter body kit must be specified by generation and wheelbase before you order: the 2019-2026 Mercedes-Benz Sprinter belongs to the W907 generation (sold in the US as the VS30), and parts are engineered separately for the L1 short, L2 medium, L3 long, and L4 extra-long wheelbases. At DL Auto Design we manufacture every front bumper, grille, side skirt, rear bumper, diffuser, arch flare, and roof spoiler in-house in Lithuania, supplied in paint-ready ABS plastic or fiberglass, with worldwide shipping and 0% VAT for all buyers outside the European Union.

W907 vs W906: Which Generation Is Your 2019-2026 Sprinter?

Mercedes-Benz launched the third-generation Sprinter - chassis code W907 for panel and cargo vans, W910 for the cab-chassis - in 2018 for the 2019 model year. If your Sprinter carries a build date from 2018 onward, it is a W907/VS30 and requires W907-specific body kit parts. The previous W906 generation ran from 2006 to 2018 and has a completely different front-end structure and bumper mounting system. Mixing generations is one of the most common ordering mistakes we see.

A quick check: the W907 has a portrait-orientation touchscreen or MBUX display on higher trims, a one-piece upper grille that integrates with the hood line, and redesigned headlight housings. If your van has the older tombstone-shaped grille without the integrated hood panel, you have a W906. Both generations are supported by DL Auto Design with dedicated product lines.

Wheelbase Codes for the 2020-2026 Sprinter: L1 to L4 Explained

Wheelbase directly affects the length of side skirts and rear bumper proportions. Mercedes-Benz uses four wheelbase codes for the W907 platform that apply equally to 2019, 2020, 2021, 2022, 2023, 2024, 2025, and 2026 model years.

Front bumpers and grilles are wheelbase-neutral because they bolt to the same front subframe across all W907 variants. Side skirts, however, are cut to L1/L2 or L3/L4 length. When you contact us, always state your wheelbase code or body length in inches - we confirm the correct cut before production.

Front Bumper Options for the 2019-2026 Sprinter (W907)

The front bumper is the single most impactful styling change on any Sprinter build. We offer several distinct design lines, each developed to bolt directly onto the W907/VS30 front crash structure without cutting or welding.

Our Sprinter W907 Sport front bumper is engineered with factory parking sensor ports and fog light housings already integrated into the mold, so your existing ADAS sensors and wiring harness reuse OEM mounting positions. Every Sport bumper ships with a matching front grille included - no separate grille purchase required.

For owners who want a cleaner executive look, the Sprinter W907 Elegance front bumper delivers a flush lower chin with a wider lower air intake and integrated parking sensor openings, also supplied with a grille. Both designs are compatible with the full 2018-2025 W907 build range, including all 2019, 2020, 2021, 2022, 2023, and 2024 Sprinter model years.

Facelift Bumper for 2021+ Model Year Vans

Mercedes-Benz introduced a minor facelift to the W907 for the 2021 model year, adjusting the lower bumper clip positions and headlight washer nozzle locations. Our W907 Facelift front bumper is designed specifically for 2021-2026 build dates and accounts for these mounting changes. If your Sprinter was built after September 2020, specify the facelift variant when ordering.

Grille Styles: AMG, Star, Debadged, and Diamond

Grille replacement is the fastest way to change the face of a 2019-2026 Sprinter. We manufacture four distinct grille families for the W907 platform, all in ABS plastic with chrome, gloss black, or matte black finish options.

• Tuning / AMG-Style Grille: multi-slat horizontal bar design inspired by the AMG GT grille language, aggressive and wide.
• Star / Radiator Star Grille: features a prominent central Mercedes star surrounded by a pin-stripe or diamond mesh, popular in luxury transfer and VIP builds.
• Debadged Grille: removes the Mercedes star badge entirely for a clean, aftermarket aesthetic favored by conversion builders.
• Diamond / D-Style Grille: diamond-pattern mesh background with a bold surround, part of our full W907/W910 body kit sets.

All W907 grilles are supplied unpainted (paint-ready) as standard, or we can paint to your RAL or MB paint code before shipping. Lead time for pre-painted parts is typically 5-7 additional working days.

Side Skirts for Long Wheelbase Sprinter Builds

Long wheelbase Sprinter side skirts (L3/L4) are one of our most-requested products for conversion builders, camper vans, and luxury shuttle operators. Our W907 ABS side skirts mount to the factory sill pinch weld using pre-drilled holes and supplied hardware, requiring no welding. The profile sits flush with the lower door edge and adds approximately 80 mm of visual height to the rocker panel.

For short and medium wheelbase vans (L1/L2), the same skirt design is available at a shorter cut length. Always specify your wheelbase code at checkout - we produce skirts to order and cannot exchange cut-to-length panels after manufacture.

Rear Bumpers and Diffusers

The W907 rear end accepts our Sport rear bumper, VIP rear bumper, and add-on rear diffuser as standalone or combined purchases. The diffuser fits behind the standard factory rear bumper if you prefer to retain OEM bumper styling while adding visual depth and a sporty lower section. All rear bumpers include reversing sensor knockout points for standard 4-sensor and 8-sensor configurations.

Full Body Kit Sets for W907 and W910

For customers who want a unified look across the entire van, we offer complete body kit sets that combine front bumper, grille, side skirts, rear bumper, arch flares, and roof spoiler. Our W907/W910 Full Body Kit with Diamond Grille and our W907/W910 Full Body Kit with Roof Spoiler are the two flagship configurations. Ordering as a set ensures all panels are molded in the same production batch, eliminating color-match variance between parts.

Materials: ABS Plastic vs Fiberglass for Your 2024 Sprinter Body Kit

We manufacture Sprinter body kit parts in two primary materials, and the choice affects weight, flexibility, and repair behavior.

For fleet operators and daily-driven vans we recommend ABS. For one-off luxury conversions and show builds where weight matters, FRP is the better choice. Many of our TUV-certified parts are available in both materials - the certificate covers the specific part design regardless of material when both variants pass the same dimensional and mounting standard.

ADAS and Parking Sensor Compatibility

The 2019-2026 W907 Sprinter uses a front parking sensor array (PDC), optional blind-spot radar, and on some trim levels a forward-facing camera mounted in the grille or windshield base. Our bumpers that specify parking sensor compatibility are molded with pre-cut knock-out ports at the factory sensor positions. Radar modules that mount behind the bumper fascia require a clear radar-transparent zone; contact us with your specific radar bracket dimensions before ordering if your van has active blind-spot or front cross-traffic assist radar.

TUV Certification and Road Legality

Several of our Sprinter body kit components carry TUV type-approval certificates, which are recognized across EU member states and many other markets. A TUV certificate means the part has been independently tested for dimensional accuracy, mounting integrity, and in some cases pedestrian safety compliance. When you receive a TUV-certified part from us, the certificate document is included in the shipment and can be presented to vehicle inspection authorities. Parts without TUV certification are sold as styling accessories; fitment legality for road use in your specific country remains your responsibility to confirm with local transport authorities.

Shipping, Customs, and VAT for US and European Buyers

We ship worldwide from Lithuania using DHL, FedEx, and freight forwarding for large full body kit orders. Standard delivery to Western Europe is 3-5 business days. Delivery to the United States typically takes 7-12 business days depending on customs clearance.

EU customers pay Lithuanian VAT (21%) at checkout unless they provide a valid EU VAT registration number for B2B zero-rating. Buyers outside the European Union - including all US customers, UK customers post-Brexit, and South Korean customers - pay 0% VAT on their DL Auto Design order. Import duties in the destination country (US CBP, HMRC, Korean customs) are the buyer's responsibility; we declare parts accurately on customs forms and do not falsify commercial invoice values.

Large orders such as full body kit sets may ship as freight rather than courier. We provide tracking and all necessary export documentation. Packaging is reinforced foam-and-timber crating for fiberglass panels to prevent transit damage.

Fitment Confirmation Checklist Before You Order

1. Confirm generation: W907 (2018-present) or W906 (2006-2017).
2. Note your wheelbase code: L1, L2, L3, or L4 (or body length in inches for US-spec vans).
3. Check build date for facelift: pre-September 2020 or post-September 2020.
4. List active safety systems: PDC sensor count, radar modules, forward camera position.
5. Decide material: ABS plastic or fiberglass/FRP.
6. Decide finish: unpainted/paint-ready, or pre-painted to your MB paint code.
7. Confirm your destination country for VAT and shipping method.

Frequently Asked Questions

Does a 2020 Sprinter body kit fit a 2019 Sprinter?

Yes. The 2019 and 2020 Sprinter are both W907 generation with identical front-end mounting points for bumpers and grilles. The only fitment split within the W907 range is the 2021 facelift, which changed lower bumper clip positions. A pre-facelift 2019 or 2020 bumper will not align correctly on a post-facelift 2021-2026 van, and vice versa.

What body kit parts are wheelbase-specific on the 2019-2026 Sprinter?

Front bumpers and grilles are wheelbase-neutral and fit all L1-L4 variants. Side skirts are cut to length per wheelbase and must be specified as L1/L2 or L3/L4 at the time of order. Rear bumpers are also universal across wheelbases on the W907 platform.

Can I keep my factory parking sensors with an aftermarket W907 front bumper?

Yes, provided you select a bumper that specifies parking sensor compatibility. Our Sport, Elegance, Facelift, and several other W907 front bumpers are pre-molded with PDC sensor knock-out ports at OEM positions so your existing sensors and wiring reinstall without modification.

Do US buyers (VS30 Sprinter) pay EU VAT on DL Auto Design orders?

No. All buyers outside the European Union, including customers in the United States, pay 0% VAT on their orders. US import duties assessed by US Customs and Border Protection are separate and are the buyer's responsibility.

What is the difference between a 2024 Sprinter body kit in ABS vs fiberglass?

ABS plastic flexes on minor impacts and is easier to repair with adhesive or ABS welding rod, making it better for commercial and daily-use vans. Fiberglass (FRP) is 10-20% lighter and suited to custom luxury builds, but cracks rather than flexes on sharp impacts and requires gelcoat or primer before painting. Both materials are offered for most W907 body kit parts at DL Auto Design.

Is a long wheelbase Sprinter body kit different from a short wheelbase kit?

The front bumper and grille are the same part for all wheelbases. Side skirts are the critical difference: long wheelbase L3/L4 vans require a longer skirt panel than L1/L2 short and medium wheelbase vans. Always specify your wheelbase code when ordering side skirts to receive the correctly sized panels.

Choosing the right 2019 Sprinter body kit means matching generation (W907), wheelbase (L1-L4), build date (pre- or post-2021 facelift), and sensor compatibility before placing an order - not after. At DL Auto Design we manufacture every part in-house, offer ABS and fiberglass options, supply TUV certificates where applicable, paint panels to your MB code on request, and ship worldwide with 0% VAT for non-EU buyers. Browse our full W907 bumper and body kit range on dlautodesign.com, or contact our team with your VIN or build sheet for a confirmed fitment recommendation before you buy.