DL Auto Design vs Maxton Design Sprinter Aero Parts

Information: DL Auto Design vs Maxton Design Sprinter Aero Parts

DL Auto Design and Maxton Design are both aftermarket manufacturers that list exterior styling parts for the Mercedes Sprinter, including front bumpers, side skirts and splitter-style lips, but the two catalogs are not identical and should be compared part by part rather than by brand name alone. DL Auto Design is based in Panevezys, Lithuania and publishes a specific product line for the W906 (2006-2018) and W907 (2018-present) Sprinter generations, plus Volkswagen Crafter/MAN TGE and Mercedes Vito/V-Class parts. Confirm Maxton's current Sprinter-specific range, materials and generation coverage directly on Maxton's own listings before comparing fitment or price.

How DL Auto Design and Maxton Design Differ at a Glance

Both brands sell in the same general category: bolt-on Sprinter styling parts such as front bumpers, rear bumpers, side skirts, grilles and roof spoilers. The practical differences that affect a purchase decision are the exact generation coverage listed for each part, whether a part is sold individually or only inside a full kit, and whether the listing documents sensor or camera provisions. This article covers what DL Auto Design confirms in its own catalog. For any Maxton Sprinter body kit part, verify the same details on Maxton's own product page, since specifications can change between model years and listings.

Comparison Criteria That Matter More Than the Brand Name

When comparing a DL Auto Design bodykit part against a Maxton Sprinter body kit part, work through the same checklist regardless of brand:

• Which Sprinter generation the part is listed for: W906, W907 or W910
• Whether the part is sold as a standalone piece or only as part of a full body kit
• Whether the listing mentions parking sensor or camera provisions for that exact part
• Whether the part is described for a pre-facelift or facelift front bumper
• Whether other van platforms (Crafter, MAN TGE, Vito, V-Class) are covered by the same manufacturer

Sprinter Generation Coverage: W906, W907 and W910

The Mercedes-Benz Vans Upfitter Portal identifies the 2019-present Sprinter and the 2023-present eSprinter under model series 907. Earlier Sprinter vans (roughly 2006-2018) are commonly referenced as W906. DL Auto Design lists separate product lines for both generations, including the Mercedes Sprinter Tuning Front Bumper W906 and the Mercedes Sprinter Tuning Front Bumper W907. Before comparing a part from any brand, confirm which generation and which bumper style (standard, facelift, sport, elegance or VIP) the listing actually covers, since a part built for one generation will not fit the other.

Comparison Checklist: What to Verify for Each Brand

Front Bumper and Splitter-Style Parts: What to Check Before Ordering

A Sprinter splitter comparison between any two brands should focus on the exact bumper or lip the part is designed to attach to, not just the general style name. A front lip, splitter or apron that is not matched to the correct bumper generation and facelift status will not align correctly. Mercedes-Benz technical guidance states that bumper modifications must account for the vehicle's exact parking, radar, camera and driver-assistance sensor configuration, so confirm this against the specific van's build sheet before ordering from any manufacturer, not only against a generic model year.

DL Auto Design's Verified Sprinter Product Range

DL Auto Design's published Sprinter catalog includes, among other items, the Mercedes Sprinter W907 Front Bumper Facelift, the Mercedes Sprinter Tuning Side Skirts W907 Abs Plastic 2020, radiator grilles, roof spoilers, arch flares and full W907/W910 body kit sets. Each listing states the exact model coverage in its title; use that wording, not the general category, to confirm fitment for a specific van.

Who Each Option May Suit

DL Auto Design may suit a buyer who wants a single manufacturer covering both Sprinter generations plus Crafter/TGE and Vito/V-Class parts under one catalog. A buyer already set on a specific Maxton Sprinter body kit part, such as a particular splitter or side skirt design, should confirm that exact part's current generation coverage, material and sensor notes directly with Maxton rather than assuming parity with DL Auto Design's listings, since the two catalogs are built and documented independently.

US and Europe: Naming and Compliance Notes

US buyers researching this category will also see the term VS30 used for the current Sprinter generation; confirm that any part description using VS30 or W907 refers to the same van before ordering, and confirm import duties and exact configuration separately. European buyers should use W907 or W910 terminology as listed on the manufacturer's own product page and confirm VAT and any local inspection requirements with the seller, since neither brand's general catalog description substitutes for a vehicle-specific check.

Frequently Asked Questions

Is a Maxton Sprinter body kit part interchangeable with a DL Auto Design part?

Not automatically. Interchangeability depends on matching the exact Sprinter generation, bumper style and facelift status listed for each part, so compare the specific product descriptions rather than the brand names.

Does DL Auto Design make parts for both the W906 and W907 Sprinter?

Yes, DL Auto Design lists separate product lines for the W906 (2006-2018) and W907 (2018-present) Sprinter generations, including front and rear bumpers, side skirts and grilles for each.

Do any DL Auto Design Sprinter bumpers account for parking sensors?

Some W907 front bumper listings are specifically named as including parking sensor provisions. Always confirm the exact sensor and camera configuration of your van against that specific listing before ordering.

Does DL Auto Design only make parts for the Sprinter?

No, DL Auto Design also lists exterior styling parts for the Volkswagen Crafter and MAN TGE, and for the Mercedes Vito and V-Class, in addition to its Sprinter catalog.

Should I compare price before confirming fitment?

No, confirm the exact Sprinter generation, bumper style and sensor configuration first. Price comparisons between brands are only meaningful once both parts are confirmed to fit the same van configuration.

Comparing DL Auto Design and Maxton Design on Sprinter aero parts comes down to matching each specific part to your van's exact generation, bumper style and sensor configuration rather than choosing by brand reputation alone. DL Auto Design publishes separate W906 and W907 product lines, individual parts and full body kit sets, plus Crafter/TGE and Vito/V-Class options, all listed with their exact model coverage. Review the W907 and W906 bumper, side skirt and grille listings on dlautodesign.com and confirm compatibility for your VIN and configuration before ordering.