Mercedes Sprinter AMG Style Body Kit: Full Exterior Upgrade Guide

Information: Mercedes Sprinter AMG Style Body Kit: Full Exterior Upgrade Guide

A Mercedes Sprinter AMG style body kit replaces or adds over the factory front bumper, grille, side skirts, rear bumper and roof spoiler to give the W907 (VS30) or W906 van an aggressive, lowered sport appearance that mirrors Mercedes-AMG passenger car design language. At DL Auto Design we manufacture these parts in Lithuania from ABS plastic and fiberglass/FRP, ship worldwide, and offer EU 0% VAT for non-EU buyers including customers in the United States and South Korea.

What Is an AMG Style Body Kit for the Sprinter?

AMG styling on a van means sharper horizontal lines, a wider lower front fascia, a bold grille with pin or diamond mesh, deep side sills, and a rear diffuser-style bumper that together reduce visual height and add width. Unlike genuine AMG passenger car parts, these are purpose-built aftermarket components sized for a full-length commercial van platform. We design each piece so the overall proportion still reads as a Sprinter but reads louder on the road.

The term is used interchangeably with Sprinter AMG bodykit and W907 AMG sport kit in online searches, so we use all three names throughout this guide. The underlying product categories are the same: front bumper, grille, side skirts, rear bumper/diffuser, arch flares and roof spoiler.

Fitment by Generation: W906, W907/VS30 and W910

Choosing the wrong generation is the most common and most expensive ordering mistake. The table below maps the three Sprinter platforms to the correct DL Auto Design product lines.

W907 and W910 share the same front clip geometry, so most of our front bumpers and grilles that are listed for W907/W910 fit both platforms. The rear bumper differs because the W910 cab-chassis has a different tail structure, so always confirm your body style when ordering.

Wheelbase also matters for side skirts and full body kits. We produce skirts for L1 (compact), L2 (standard), L3 (long) and L4 (extra-long) wheelbases. A short-wheelbase skirt will leave a visible gap on an L3 van, so specify your wheelbase in the order notes.

AMG Style Kit Components: What Each Part Does

Front Bumper

The front bumper is the visual centerpiece of any AMG style build. Our W907 sport bumper features wide lower air intakes, integrated fog lamp housings and a lower chin that sits closer to the road than the OEM bumper. The Mercedes Sprinter Tuning Front Bumper W907 is our core AMG-inspired option for 2018-to-present vans and includes provisions for factory parking sensors so you do not lose ADAS functionality.

For buyers who want a complete value bundle, the Mercedes Sprinter W907 Front Bumper Sport 2018-2025 package ships with a matching front grille included at no extra charge. This is the most popular entry point for US and Korean buyers building a full AMG look from a single order.

Grille

The grille carries the most AMG visual weight because it sits at eye level and faces every oncoming car. A pin-stripe or diamond-mesh insert in gloss black or chrome transforms the Sprinter nose from utilitarian to purposeful. We offer multiple grille styles for the W907 including debadged versions for a clean, emblem-free look and tuning versions with integrated surround trim.

Side Skirts

Side skirts visually lower the roofline and add width, which is critical on a tall van. Our ABS plastic skirts for the W907 are produced for 2020 and later model years and mount to the OEM sill without drilling on most variants. They are available paint-ready (primed) so your local body shop can match any factory or custom color.

Rear Bumper and Diffuser

A matching rear bumper completes the kit by repeating the horizontal sport language of the front. The rear bumper for the W907 includes a lower diffuser section with sculpted vents that mirror genuine AMG diffuser styling. We offer multiple rear bumper tiers from the sport tuning version to the VIP rear bumper for luxury transport builds.

Roof Spoiler

A roof spoiler with integrated light bar extends the aggressive silhouette to the top of the van and is particularly popular on high-roof vans used as luxury shuttles or VIP transfers in both the US market and South Korea. This is the component that separates a full body kit build from a bumper-only upgrade.

Materials: ABS Plastic vs Fiberglass (FRP)

We manufacture most AMG style components in two material options and the choice affects weight, rigidity, finishing labor and price.

• ABS plastic: Injection-molded or vacuum-formed, flexible enough to absorb minor parking impacts without cracking, easier to source replacement sections, and the preferred choice for daily-use commercial vans in the US and Korea where road debris is common.
• Fiberglass/FRP: Lighter on larger panels such as the rear bumper, stiffer for clean line definition on show builds, slightly more work to fill and prime before painting, and the preferred choice when the van is a dedicated VIP or luxury shuttle with controlled parking.

Both materials are paint-ready after our factory primer coat. If you order a painted finish, provide your Mercedes paint code and we match it using waterborne automotive paint in our Lithuanian production facility.

Parking Sensors and ADAS: What You Must Preserve

US-market VS30 Sprinters and Korean-market W907 imports typically carry front parking distance control (PDC), rear PDC, and on higher trims a radar-based Active Distance Assist. Our bumpers designed for sensor retention include pre-cut sensor holes positioned to OEM specification. Do not use a bumper that lacks sensor cutouts if your van has PDC because the sensor signal will be blocked and trigger fault codes.

For vans with a front camera (Active Lane Keeping Assist on the W907), the camera is mounted in the windshield, not the bumper, so bumper replacement does not affect lane-keeping function. The key sensor to protect is the front radar mounted behind the bumper center on adaptive cruise-equipped vans. Our sport bumper range specifies radar clearance on the product page; if in doubt, contact us with your VIN option list before ordering.

TUV Certification and Legal Compliance

TUV certification means a German technical inspection authority has validated that the part meets EU road safety and pedestrian impact requirements. Several parts in our catalog carry TUV certificates. For US buyers, TUV is not a federal requirement but is strong evidence of engineering quality that supports state-level vehicle inspection. For Korean importers, TUV documentation supports the KATRI/KATECH approval process for modified commercial vehicles.

We recommend requesting the TUV certificate PDF when placing an order for any front bumper that will face a periodic roadworthiness inspection. Parts without TUV are still legal for use in most US states when fitted correctly, but the certificate eliminates inspector ambiguity.

Shipping, Customs and VAT: US and South Korea

We ship from Lithuania via DHL, FedEx and freight forwarding depending on parcel size. Single bumpers typically ship as oversized parcels; full body kits ship as palletized freight.

• United States: Import duty on plastic automotive body parts (HTS 8708.29) is currently 2.5% for most origins. Our commercial invoice states country of manufacture as Lithuania (EU), so duty is calculated on the declared customs value. Buyers are responsible for import duties; we provide accurate documentation to simplify customs clearance.
• South Korea: EU-Korea FTA reduced tariffs apply to many automotive parts. Buyers should confirm current HS code rates with a Korean customs broker. We provide EU certificate of origin documentation on request.
• EU 0% VAT: Non-EU buyers including US and Korean customers pay 0% Lithuanian VAT, which means the price shown excludes the 21% VAT applied to EU buyers. This is a significant saving on a full body kit order.

Installation Overview

An AMG style front bumper swap on the W907 is a two-person, three-to-four hour job at a body shop familiar with Mercedes commercial vehicles. The process involves removing the OEM lower bumper cover, disconnecting PDC connectors and fog lamp wiring, unbolting the bumper retainer brackets, fitting the new bumper to the existing carrier, reconnecting sensors and lights, and adjusting the gap to the hood. We include a fitment diagram with each order.

Side skirts are adhesive and bolt-on combined. On ABS skirts we recommend 3M panel adhesive tape on the sill contact surface plus two M6 bolts into existing body holes where available. This prevents vibration rattle on long highway runs common to US fleet routes.

Roof spoilers mount to the OEM roof lip with adhesive and two machine screws into the steel roof flange. Light bar wiring routes through the existing roof gutter channel.

AMG Look vs Maybach Look: Choosing the Right Style

Our W907 catalog covers two dominant luxury design directions and choosing one changes the character of the entire build.

South Korean buyers in particular split almost evenly between AMG sport style for younger operator fleets and Maybach style for chauffeur companies. US buyers trend toward AMG sport for shuttle and tour van builds where a bold street presence is the goal.

Full Body Kit Packages vs Individual Parts

Ordering a full body kit package ensures all components share the same design language, gap tolerances and primer batch so paint match is consistent across panels. Our W907/W910 full body kit includes front bumper, grille, side skirts, rear bumper and roof spoiler as a coordinated set. Individual parts can be mixed, but we recommend ordering the front bumper and grille together at minimum because the grille surround is designed to the bumper profile.

Frequently Asked Questions

Does the Mercedes Sprinter AMG style body kit fit both 2500 and 3500 models?

Yes. The W907 front bumper and grille fit all 2018-to-present Sprinter 2500 and 3500 models regardless of payload rating because the front clip geometry is identical. Side skirts must be ordered by wheelbase (L1 through L4) to match your specific van length.

Will the AMG style front bumper work with my factory parking sensors?

Our sport front bumpers for the W907 include pre-cut holes at OEM sensor positions. You transfer your existing PDC sensors from the factory bumper to the new bumper. No new sensors or recalibration are required for standard PDC. Radar-based adaptive cruise owners should confirm radar clearance on the specific product page before ordering.

What is the difference between ABS and fiberglass for a Sprinter body kit?

ABS plastic is flexible, impact-resistant and recommended for daily commercial use. Fiberglass/FRP is lighter and stiffer, preferred for show builds or dedicated VIP shuttles with careful parking habits. Both are available paint-ready or painted to your color code.

How long does shipping take to the United States or South Korea?

Express courier (DHL or FedEx) typically delivers individual parts to the US in 5-10 business days from our Lithuania facility. Pallet freight to South Korea or the US West Coast takes 10-20 business days depending on port routing. We provide tracking on all shipments.

Do I pay VAT as a US or Korean buyer?

No. Non-EU buyers pay 0% Lithuanian VAT. The VAT saving is automatically applied at checkout when your shipping address is outside the European Union, which can reduce the effective price by 21% compared to what EU buyers pay.

Is a TUV certificate included with the AMG body kit parts?

Selected parts in our catalog carry TUV certificates; availability is listed on each product page. If TUV documentation is required for your local vehicle inspection or import approval, request the certificate PDF when placing your order and we will confirm availability for the specific part.

Can I order the AMG body kit already painted in my Sprinter color?

Yes. Provide your Mercedes paint code (found on the sticker inside the driver door jamb or B-pillar) when ordering and we paint the parts in our Lithuanian facility before shipping. Parts are also available in primer-ready finish if you prefer your local body shop to paint them.

A Mercedes Sprinter AMG style body kit is the single highest-impact exterior upgrade you can make to a W907 or W906 van, transforming a fleet-spec commercial vehicle into a recognizable sport or luxury shuttle. At DL Auto Design we manufacture every component - front bumper, grille, side skirts, rear bumper and roof spoiler - to precise generational fitment, offer both ABS and fiberglass materials, preserve factory sensor positions, and ship worldwide with 0% VAT for US and South Korean buyers. Browse the full W907 AMG sport kit range on our product pages and contact our team to confirm wheelbase, sensor configuration and paint code before placing your order.