Mercedes Sprinter W907 Body Kit: Fitment, Parts and Prices

Information: Mercedes Sprinter W907 Body Kit: Fitment, Parts and Prices

A Mercedes Sprinter W907 body kit is a complete set of aftermarket exterior parts - front bumper, grille, side skirts, rear bumper, diffuser and optional arch flares - engineered specifically for the third-generation Sprinter platform sold from 2018 to 2025, known in the United States as the VS30. At DL Auto Design we manufacture every W907 kit in-house in Lithuania from ABS plastic or fiberglass/FRP, supply TUV-certified options, ship worldwide with 0% VAT for non-EU buyers, and offer parts paint-ready or fully painted to order.

What Is the Mercedes Sprinter W907 Generation?

The W907 (also designated VS30 in North America and W910 for the all-wheel-drive variant) launched in 2018 as Mercedes-Benz replaced the W906. The new platform brought a completely redesigned front fascia, flush-mounted sensors, and an updated grille frame - meaning every body kit designed for the older W906 is incompatible without modification. If you own a Sprinter built from 2018 onward, all fitment references should say W907, MY2018+, or 2018-2025.

The 2021 facelift introduced a revised front bumper lower section and a restyled grille insert. Parts made for pre-facelift W907 models (MY2018-2020) may not clip directly onto facelift units (MY2021+), so always confirm your model year before ordering.

Full W907 Body Kit: What Parts Are Included?

A complete Mercedes Sprinter W907 body kit from DL Auto Design typically covers six exterior zones. The table below maps each zone to the available product range.

You can order individual components or combine them into a full kit. Our W907/W910 Full Body Kit with Diamond Front Grille bundles the most popular pieces into one shipment, simplifying freight and ensuring colour-matched delivery.

W907 Front Bumper Options: Sport, Elegance, VIP and Facelift

The front bumper is the most transformative single piece in any Sprinter W907 body kit. We offer several distinct design families so builders can match the van's intended purpose - luxury transfer, cargo, ambulance conversion, or camper.

• Sport bumper - aggressive lower splitter, fog-light housings, parking sensor cutouts. Compatible with MY2018-2025 including pre-facelift and facelift noses.
• Elegance bumper - cleaner lower profile, wide lower air intake, sensor-compatible. Suits executive and VIP transfer builds.
• VIP bumper - maximum presence, deep lower chin, styled for limousine conversions and high-end shuttle vans.
• Facelift bumper - mirrors the design language of the post-2021 OEM refresh; ideal for upgrading pre-2021 vans or replacing a facelift nose with a sportier finish.

Our W907 Sport Front Bumper (2018-2025) includes parking sensor ports and fog-light positions out of the box, and ships with a matching front grille as a gift - one of the most complete single-box solutions we offer.

Sensor and ADAS Compatibility

Every W907 bumper we manufacture includes pre-cut openings or integrated ports for the OEM front parking sensors. Vehicles equipped with Active Distance Assist (Distronic) use a radar module mounted behind the lower bumper centre - our Sport and Facelift bumpers preserve this mounting zone. We recommend professional installation with sensor recalibration after fitting any replacement bumper on ADAS-equipped vans.

W907 Grille Styles: From AMG-Look to Debadged

The grille is the fastest single-piece upgrade for a Sprinter W907 and requires no painting in most cases because the mesh or bar inserts ship in gloss black or chrome ABS. Available styles include:

• Diamond/AMG-style - diamond mesh insert, chrome surround, most popular in Europe and South Korea for luxury conversion builds.
• Star grille (MY2021 version) - replicates the post-facelift OEM star pattern with upgraded finish.
• D-Style grille - horizontal bar layout, clean and modern.
• Tuning grille - two-type design (available in MY2018 and MY2020 variants), ABS plastic, direct bolt-on.
• Debadged grille - removes the three-pointed star for a stealth or custom-badge look popular in the van-life and camper community.

All grilles are vehicle-generation specific. W906 grilles will not fit W907 frames; always confirm MY2018+ or MY2021+ depending on your facelift status.

Side Skirts, Rear Bumpers and Arch Flares for the W907

A cohesive body kit requires all four corners to match. Our W907 side skirts in ABS plastic (2020+ profile) bolt to the factory rocker panel without cutting. The Sport Tuning rear bumper for W907 integrates a lower diffuser element and is available with or without a tow-bar cutout - specify at checkout. The VIP rear bumper offers a wider lower valance suited to executive van conversions.

The W907 arch flares widen the visual stance by extending each wheel arch outward. They are especially popular on high-roof long-wheelbase (L3/L4) builds where the standard arches look narrow relative to the van's height. Flares are supplied in ABS plastic, paint-ready, and attach with automotive-grade adhesive plus hidden fasteners.

Materials: ABS Plastic vs. Fiberglass/FRP - Which Should You Choose?

We manufacture W907 body kit parts in two primary materials and the right choice depends on your use case and budget.

• ABS plastic - injection-moulded thermoplastic. High dimensional accuracy, OEM-level flex, excellent resistance to minor impacts. Ideal for commercial vans and daily drivers. Most of our grilles and side skirts are ABS only.
• Fiberglass/FRP - hand-laid composite. Lighter than ABS on larger panels, easier to repair with body filler, preferred by custom builders and show vehicles. Some front and rear bumpers are available in FRP.

Both materials arrive paint-ready with a smooth primer-ready surface. We also offer pre-painted parts matched to your Mercedes paint code - specify the three-digit code (for example 040 Polar White or 197 Obsidian Black) in the order notes.

Fitment by Wheelbase: L1, L2, L3 and L4

The W907 platform spans four wheelbases. Front bumpers and grilles are universal across all wheelbases because the front face geometry is identical. Side skirts, however, are cut to specific lengths and you must specify your wheelbase at checkout. Rear bumpers are also universal for standard-rear-door models but differ for vehicles with swing-out or barn-door configurations. Our product pages list compatible wheelbase and body configurations for every part.

TUV Certification and Legal Compliance

Several DL Auto Design front bumpers and add-on parts carry TUV certificates, which document that the part meets European road safety and construction standards. TUV-certified parts simplify periodic technical inspection (MOT/TUV/APK) in Germany, the Netherlands, Belgium and other EU member states. For buyers in the United States, TUV documentation also adds reassurance of engineering rigour even though US state inspection requirements vary. We display certification status clearly on each product page - if you need the TUV document for your local authority, contact us before ordering.

Pricing: How Much Does a Sprinter W907 Body Kit Cost?

We do not publish fixed retail prices in editorial content because exchange rates, material options, paint choices and kit configurations affect the final figure. Visit the individual product pages linked throughout this article for current pricing. As a general guide, individual parts (grilles, side skirts, single bumpers) cost less than full-kit bundles, and our hot-price section frequently offers front bumper plus grille combinations at a combined discount compared to buying separately.

Non-EU buyers (United States, United Kingdom post-Brexit, South Korea, Australia, and others) pay 0% EU VAT at checkout, which offsets a significant portion of shipping cost. EU-registered business buyers can also apply for VAT-exempt status - contact our team with your VAT ID before placing a large order.

Shipping and Customs: US, Europe and International Orders

We ship from Lithuania by express courier (DHL, FedEx, UPS) and economy freight depending on package size. Front bumpers and full kits are large parcels and typically ship by freight pallet. Estimated transit times are 3-7 business days to Western Europe, 7-14 days to the United States, and 10-18 days to South Korea and other Asian markets. Import duty in the US is assessed by CBP based on HTS codes for plastic automotive parts - buyers are responsible for duties and taxes at the port of entry. We provide all required commercial invoices and packing lists. For large commercial orders (conversion shops, fleet operators), contact us for a dedicated freight quote.

W907 vs. W906: Spotting the Difference Before You Order

The two generations look similar from a distance but the fronts are completely different. The W906 (2006-2018) has a taller, more upright lower bumper with exposed tow-hook cover and a different grille opening shape. The W907 (2018-present) has a wider lower air intake, integrated sensor strip, and a revised grille frame with a horizontal mounting lip. If your van was registered before mid-2018, it is almost certainly a W906 and you need the corresponding W906 parts. Check the vehicle identification plate inside the driver door jamb for the model designation or confirm with your model year.

Frequently Asked Questions

Does a W907 body kit fit the VS30 Sprinter sold in the United States?

Yes. The VS30 is the North American market name for the W907 platform. All DL Auto Design W907 body kit parts fit VS30 Sprinters produced from 2018 onward. Confirm your model year and facelift status (pre-2021 or post-2021) before ordering.

Will a W906 front bumper fit a W907 Sprinter?

No. The W906 and W907 share no interchangeable front body panels. The mounting points, grille opening geometry and lower fascia profiles are different between generations. Always order parts labelled W907 or MY2018+ for third-generation Sprinters.

Do DL Auto Design W907 bumpers work with parking sensors?

Yes. Our Sport, Elegance, VIP and Facelift front bumpers include pre-cut or integrated ports for OEM-spec parking sensors. ADAS radar module clearance is maintained. Professional installation with sensor recalibration is recommended.

Are DL Auto Design body kit parts TUV certified?

Selected parts carry TUV certificates. Certification status is listed on each product page. If you need the physical certificate for a vehicle inspection, request it from our team at time of order.

How much does a full W907 body kit cost?

Prices vary by configuration, material (ABS or fiberglass), paint option and any active promotions. Visit the product pages linked on this article for current pricing. Non-EU buyers pay 0% VAT, which reduces the net cost significantly.

Can I order the parts pre-painted in my Sprinter colour?

Yes. Provide your Mercedes three-digit paint code in the order notes and we will paint the parts before shipping. Parts are also available paint-ready (primed) for local body shops.

Which wheelbase do I need to specify for side skirts?

Side skirts are cut to specific lengths. The W907 is available in L1, L2, L3 and L4 wheelbases. Specify your wheelbase at checkout. Front bumpers and grilles are universal across all wheelbases.

Does the 2021 facelift grille fit pre-2021 W907 Sprinters?

The facelift grille may require minor modification to fit pre-facelift (MY2018-2020) frames because the surrounding trim profile changed in 2021. Check the individual product page notes or contact us to confirm direct fitment for your specific van.

The Mercedes Sprinter W907 body kit range from DL Auto Design covers every exterior zone of the 2018-2025 platform - from a single grille upgrade to a complete Sport, Elegance or VIP transformation. Every part is manufactured in-house in Lithuania, available in ABS plastic or fiberglass/FRP, shipped worldwide with 0% VAT for non-EU buyers, and supplied paint-ready or colour-matched to your specification. Browse the full W907 product range on dlautodesign.com, use the product pages to confirm fitment for your model year and wheelbase, and contact our team for custom orders or freight quotes on large commercial builds.