Mercedes Sprinter W910 Body Kit: What Fits the Newer Platform

Information: Mercedes Sprinter W910 Body Kit: What Fits the Newer Platform

The Mercedes Sprinter W910 shares its front fascia, grille surround and side panel geometry with the W907 platform, which means the full range of W907/W910 body kit parts manufactured by DL Auto Design fits both internal codes without modification. If you own a Sprinter built from 2018 onward - whether your registration document shows W907, W910 or simply VS30 - the fitment rules below apply directly to your van.

W907 and W910: One Platform, One Body Kit Range

Mercedes-Benz introduced the third-generation Sprinter in 2018 under the VS30 platform umbrella. The W907 designation covers panel van and chassis-cab variants, while W910 covers the minibus and high-roof minivan body styles. Both share identical front clip architecture - the same bumper mounting points, grille aperture dimensions and sensor positions - so aftermarket body kit manufacturers treat them as a single fitment group.

At DL Auto Design we label our parts W907/W910 to remove any ambiguity. When a product page says W907, it fits W910 as well. The only split you need to watch is the 2021 facelift: pre-facelift vans (2018-2020) and post-facelift vans (2021-2025) use slightly different front bumper attachment clips and fog-light housings, and we produce separate SKUs for each.

Which Parts Are Available for the W910 Platform in 2025

Our current W907/W910 catalogue covers every major exterior zone. Below is a summary of available part categories and their key fitment notes.

Front Bumper Fitment: Sensors, Fog Lights and ADAS

Modern W910 vans are often specified with parking sensors, forward-facing cameras and lane-keeping radar. Our front bumpers are engineered with pre-cut sensor ports and fog-light recesses in the correct OEM positions, so your existing sensors relocate into the new bumper without re-drilling or bracket fabrication.

The post-2021 facelift models introduced a restyled sensor cluster layout. We address this with a dedicated facelift bumper SKU that mirrors the updated port geometry. Always confirm your build year when ordering - the product listing for the Mercedes Sprinter W907 Front Bumper Facelift covers the 2021-onward clip pattern and sensor arrangement in detail.

If your W910 is a high-spec minibus with Active Brake Assist radar, note that the radar emitter sits behind a dedicated cover in the lower grille. Our bumpers preserve the OEM aperture so the radar field of view is not obstructed - a critical point for road-legality across EU markets.

Full Body Kit Bundles: What the W907/W910 Set Includes

Buying individual parts works well for targeted upgrades, but a coordinated full kit produces a more cohesive result. Our Mercedes Sprinter W907 W910 Full Body Kit with Diamond Front Grille combines the front bumper, diamond-pattern grille insert, side skirts, rear bumper and diffuser in a single order. All parts are manufactured to the same panel gap tolerances, painted in the same batch if you order pre-painted, and shipped together to simplify customs clearance.

A second bundle variant includes a panoramic roof spoiler with integrated LED light bar for operators who want a distinctive silhouette alongside the lower kit. Both bundles are available paint-ready (unpainted primer) or finished in your OEM Mercedes colour code - specify the three-digit code at checkout.

ABS vs Fiberglass: Choosing the Right Material for Your Use Case

ABS thermoplastic is the standard choice for most W910 conversions. It flexes on minor impacts without cracking, is straightforward to paint using standard automotive basecoat/clearcoat systems and is lighter than steel OEM bumpers. Our ABS parts carry dimensional tolerances tight enough for TUV-certified installations in Germany and across the EU.

Fiberglass/FRP is the preferred material when weight saving matters - for example on a high-roof minibus already close to its GVW limit - or when a bodybuilder needs to cut and reshape the part for a bespoke conversion. FRP bonds well to structural adhesives and can be repaired in the field with standard glass-fibre mat. The trade-off is that FRP is more brittle under point impact than ABS, so it suits vans that are protected or parked carefully.

Both materials are supplied paint-ready with a primer sealer applied at the factory. If you order pre-painted, we apply a flexible 2K primer and OEM-matched topcoat before shipping.

TUV Certification and EU Road Legality

Several of our W907/W910 front bumpers and splitters hold TUV material and dimensional certificates, which simplifies the technical approval process for German TUV and equivalent EU roadworthiness inspections. A TUV certificate demonstrates that the part has been independently tested for dimensional integrity, material quality and edge safety - important for any operator running vehicles under commercial licensing.

If you require the TUV documentation for a specific part, contact us before ordering and we will confirm current certificate status. Parts without a TUV certificate can still be road-legal in most EU countries subject to national type-approval rules, but the paperwork burden falls on the owner.

Wheelbase Variants: L1, L2, L3 and L4

The W910 platform is produced in four wheelbases (L1 short through L4 extra-long). Front bumpers and grilles fit all wheelbase variants because the front clip geometry does not change with wheelbase. Side skirts are wheelbase-specific: the rocker panel length changes, so L1/L2 and L3/L4 use different skirt lengths. Rear bumpers are body-style-specific rather than wheelbase-specific - a panel van rear bumper does not fit a chassis-cab.

When ordering side skirts or rear bumpers, always state your wheelbase code or overall vehicle length in the order notes. We manufacture side skirts for L1-L4 to order and will confirm lead time at the time of purchase.

Grille Upgrade Options for the W910

The factory grille on the 2018-onward Sprinter uses a horizontal bar design. Our aftermarket grilles for the W907/W910 platform offer four distinct styles: AMG-style vertical fin grille, diamond-pattern Maybach-inspired grille, debadged clean grille and a star-centre grille that reinstates the classic three-pointed star badge in a larger format. All four are direct bolt-in replacements requiring no drilling or wiring.

The MY20 and later (model year 2020 onward) grilles use a revised upper trim clip. Our ABS grille range for this variant is listed separately to ensure correct clip compatibility - confirm your build date, not just your registration year, when selecting.

Ordering, Shipping and VAT for European Buyers

DL Auto Design ships from Lithuania across the EU using tracked freight. Standard delivery to Germany, France, the Netherlands, Belgium, Austria and most EU countries takes 3-7 working days. Intra-EU shipments include 21% Lithuanian VAT at checkout; buyers registered for EU VAT can zero-rate the transaction by providing their valid VAT number at the time of order.

Non-EU buyers - including customers in the UK post-Brexit, Norway and Switzerland - are invoiced at 0% VAT. Import duties and local taxes at the destination are the buyer's responsibility. We provide a full commercial invoice with HS code and accurate declared value for customs clearance.

Returns are accepted within 14 days for unmodified, unpainted parts in original packaging. Custom-painted or cut parts cannot be returned unless there is a manufacturing defect. Contact our support team for a return authorisation before shipping anything back.

Frequently Asked Questions

Does a W907 body kit fit the W910 Sprinter?

Yes. The W907 and W910 share the same front clip, bumper mounting points and grille aperture. All DL Auto Design parts listed as W907/W910 fit both internal codes. The only distinction to check is whether your van is pre-facelift (2018-2020) or post-facelift (2021-2025), as the front bumper clip and sensor layout changed at the facelift.

Will aftermarket bumpers on my W910 work with parking sensors and ADAS cameras?

Our front bumpers are engineered with OEM-position sensor ports and fog-light recesses so existing parking sensors and forward cameras relocate without re-drilling. For vans with Active Brake Assist radar, the bumper preserves the factory aperture in the lower grille to maintain the radar field of view.

Are DL Auto Design parts TUV certified?

Several front bumpers and splitters in the W907/W910 range hold TUV material and dimensional certificates. Contact us before ordering to confirm current certificate status for a specific part number.

Which material should I choose - ABS or fiberglass?

ABS is the standard choice: it flexes on minor impacts, paints easily and meets EU dimensional tolerances. Fiberglass/FRP suits weight-critical applications or bespoke conversion projects where cutting and reshaping is needed. Both are supplied with a primer sealer coat.

Do side skirts fit all W910 wheelbase variants?

Front bumpers and grilles fit all wheelbases (L1-L4). Side skirts are wheelbase-specific because the rocker panel length changes. State your wheelbase code or overall vehicle length when ordering. We manufacture to order for L1 through L4.

How is VAT handled for EU and non-EU buyers?

EU buyers pay 21% Lithuanian VAT unless they provide a valid EU VAT number for zero-rating. Non-EU buyers (UK, Norway, Switzerland and others) are invoiced at 0% VAT. Import duties at the destination country are the buyer's responsibility.

Can I order a full W910 body kit pre-painted in my colour?

Yes. Provide your three-digit Mercedes OEM colour code at checkout and we apply a flexible 2K primer and OEM-matched topcoat before shipping. Alternatively, order paint-ready parts in primer sealer and paint locally.

The W907 and W910 Sprinter platforms share the same exterior architecture, which means every front bumper, grille, side skirt, rear bumper and full body kit we produce at DL Auto Design fits your van regardless of which internal code appears on the build sheet. Choose your facelift variant, pick ABS or fiberglass to match your use case, confirm your wheelbase for side skirts, and specify your paint code if you want a ready-to-fit result. Browse the complete W907/W910 range on dlautodesign.com, or contact our team directly with your VIN and we will confirm exact fitment before you order.