Sprinter W907 AMG Body Kit: What Comes in the Set

Information: Sprinter W907 AMG Body Kit: What Comes in the Set

A Sprinter W907 AMG body kit typically includes a sport front bumper, an AMG-style grille, side skirts, a rear bumper or diffuser add-on, and optionally a roof spoiler - all designed to fit the 2018-2025 Mercedes-Benz Sprinter (VS30 platform, also called W907 or W910 in Europe). At DL Auto Design, we manufacture each component in-house in Lithuania from ABS plastic or fiberglass, cut to your specific generation and wheelbase so every piece aligns correctly from day one.

What Is a W907 AMG Style Body Kit and Who Needs It

The W907 is the current-generation Sprinter launched in 2018, sold in the United States as the VS30 and in Europe and South Korea as the W907 or W910 depending on body type. Owners who want an AMG-inspired look without factory AMG pricing choose aftermarket kits that replicate the aggressive grille mesh, deep front chin, sculpted side sills, and diffuser-style rear fascia that define the AMG aesthetic. The result is a van that commands attention whether it serves as a luxury shuttle, executive transport, camper conversion, or brand vehicle.

In South Korea, where the W907 replaced the popular W906, demand for AMG-style and Maybach-influenced front ends has grown steadily since 2019. Korean buyers frequently ask us for the full set rather than individual parts because a cohesive look requires all elements to share the same design language and paint code.

Every Component Explained: What the Full Set Contains

Sport Front Bumper

The front bumper is the centrepiece of any AMG-style build. Our W907 sport bumpers feature a wide lower intake opening, integrated fog-light housings, and channels for parking sensors - a critical detail because the VS30 and W907 use factory PDC that must remain fully functional after the swap. We offer several designs including the Sport, Elegance, VIP, and Facelift variants, each with a different aggression level to match your use case. The Mercedes Sprinter W907 Front Bumper Sport ships with a complimentary matching front grille, which removes one extra ordering step.

AMG-Style Grille

The grille is what makes an AMG kit immediately recognisable. Our W907 grilles are available in several finishes: diamond-pattern mesh, horizontal bar tuning style, D-style, star-centre, and fully debadged. Each grille is made from ABS plastic and is designed to drop into the OEM aperture without cutting the bumper support or relocating the front radar used by ADAS systems such as Distronic and Active Brake Assist. Buyers should confirm their pre-facelift (2018-2020) or MY20-plus (2021-2025) build date before ordering because the grille opening dimensions changed slightly at the facelift. The W907 Front Grill Grille Tuning page shows both fitment windows clearly.

Side Skirts

Side skirts bridge the visual gap between the front and rear bumpers and add perceived width to the Sprinter's tall bodywork. Our W907 ABS plastic side skirts are moulded per wheelbase - L1 through L4 - so the skirt length matches your van exactly. A too-short skirt on an L3 or L4 body leaves an ugly gap; our fitment-specific approach eliminates that problem. The skirts mount via existing body clips and self-tapping fasteners into the lower sill, with no permanent modification to the chassis.

Rear Bumper and Diffuser

The rear of the W907 is often overlooked but is the first thing a following driver sees. We offer two approaches: a full replacement rear bumper in VIP or Tuning style, and a diffuser add-on that bolts beneath the factory rear bumper for buyers who want to keep their original lower step or tow coupling arrangement. Both options are available in unpainted ABS plastic ready for body-shop finishing or pre-painted to your Mercedes colour code. US buyers should note that the VS30 rear bumper features a different step-height requirement compared to European spec; always confirm your market variant when ordering.

Roof Spoiler

A roof spoiler completes the silhouette by adding a visual cap to the van's tall roofline. Our W907 and W910 full body kit packages can include a roof spoiler with an integrated LED light bar, which doubles as a high-mount brake light supplement in markets where that is permitted. The spoiler adheres and mechanically fastens to the roof without drilling through the inner headliner, preserving water tightness.

Materials: ABS Plastic vs Fiberglass for the W907 Kit

We recommend ABS for most US fleet operators and South Korean luxury-shuttle builders because it tolerates parking scrapes and minor impacts without shattering. Fiberglass suits show vehicles and builders who prioritise the lightest possible outcome. Both materials arrive paint-ready; we can also supply parts pre-painted to your OEM Mercedes colour code if you supply it at checkout.

Fitment Guide: Generations, Wheelbases and Sensor Cutouts

The W907 platform covers model years 2018 through 2025 but contains two distinct front-end architectures. Pre-facelift vans (2018-2020) use a narrower lower grille surround. The MY20-plus facelift introduced a taller central star and revised sensor cluster placement. Ordering the wrong variant means you will need to trim or fill gaps - neither is acceptable on a premium build. We list pre-facelift and post-facelift options separately on every product page.

Wheelbase matters for side skirts and full-kit pricing. The Sprinter W907 is available in L1 (3,250 mm wheelbase), L2 (3,665 mm), L3 (4,325 mm), and L4 (4,325 mm extra-long body). Tell us your wheelbase or van length when ordering and we cut the skirts to match. Front and rear bumpers are wheelbase-independent.

ADAS compatibility is non-negotiable in 2025. Every bumper we manufacture for the W907 includes pre-cut apertures for the factory front parking sensors (PDC), the forward radar module (when fitted), and - on Facelift-style bumpers - the camera housing. Do not purchase any bumper that does not specify sensor compatibility; blocking a safety sensor may trigger a fault code and disable driver-assistance features.

Painting, Finishing and Installation

All parts ship in raw primer-grey unless you select the pre-painted option. A professional body shop should sand the surface with 220-grit, apply a flexible adhesion promoter, spray your base colour, and finish with two-stage clearcoat. Total paint time on a front bumper is typically 3-5 hours at a professional shop, excluding drying time. We strongly advise against rattle-can finishes on large panels because colour matching on the road is obvious under sunlight.

Physical installation for a front bumper replacement on the W907 requires removing the upper grille, disconnecting the PDC harness and washer-jet line, unbolting six to eight fasteners along the top edge and wheel arch edges, and carefully releasing the lower tabs. Reassembly is the reverse. Most experienced shops complete the swap in 90-120 minutes per panel. Side skirts typically take 30-45 minutes per side.

Shipping, Customs and VAT: US and South Korea

We ship worldwide from Lithuania. Orders to the United States travel by international courier - typically DHL, FedEx, or UPS - with delivery in 7-14 business days depending on customs clearance speed. US buyers are responsible for applicable import duties under HTS codes for plastic automotive body parts; we declare accurate commercial values on all customs paperwork to keep the process transparent.

South Korean buyers benefit from the EU-Korea FTA, which has progressively reduced tariffs on many plastic automotive parts. We advise confirming the current applicable rate with your Korean customs broker before ordering large full-kit shipments. We issue invoices in EUR and can supply a certificate of origin for customs preference purposes.

Non-EU buyers - including the US, South Korea, Australia, Canada, and most other countries - pay 0% EU VAT on their order. Lithuanian VAT (21%) applies only to EU-based buyers. This means non-EU customers effectively save 21% compared to the listed price on every order, which makes our kits highly competitive against locally sourced alternatives when total landed cost is considered.

TUV Certification and Road Legality

Several of our bumper and splitter products carry TUV (Technischer Ueberwachungsverein) certificates issued by an independent German technical inspection authority. A TUV certificate means the part has been tested for structural integrity, pedestrian safety clearance, and lighting interaction. In Germany, Austria, and other strict TUV-inspection markets, a certified bumper can be registered without individual vehicle inspection re-approval. For US buyers, TUV certification is a strong quality signal even though it is not a mandatory import requirement. Always check the individual product page for the current certificate status, as certification applies per part number and design revision.

Full Body Kit Packages vs Individual Parts

Buying a complete kit from one manufacturer ensures every panel shares identical design language, wall thickness, and colour-code reference. Mixing parts from different suppliers risks visible style mismatches and paint-batch colour variation. Our W907 and W910 full body kit packages bundle the front bumper, grille, side skirts, rear bumper or diffuser, and roof spoiler at a package price that is lower than purchasing each component separately. For South Korean buyers building executive shuttle conversions, we also offer custom colour consultation and can coordinate with local body shops through our network of international clients.

Frequently Asked Questions

Does a W907 AMG body kit fit both the pre-facelift and post-facelift Sprinter?

No. The 2018-2020 pre-facelift W907 and the MY20-plus facelift (2021-2025) have different front-end geometry. DL Auto Design lists separate SKUs for each build period. Always confirm your van's production date before ordering.

Will the kit work with my parking sensors and ADAS systems?

Yes, provided you order the correct PDC-compatible bumper. Every W907 front bumper we manufacture includes pre-cut apertures for factory parking sensors, the forward radar, and the camera module where applicable. Blocking sensors is not acceptable and can disable safety systems.

What is the difference between ABS plastic and fiberglass kits?

ABS plastic is more impact-resistant and recommended for daily-use vans. Fiberglass is lighter and suits show builds or weight-sensitive conversions. Both arrive paint-ready and accept the same finishing process.

Do I pay VAT as a US or South Korean buyer?

No. Buyers outside the European Union pay 0% Lithuanian VAT on all DL Auto Design orders. You will pay your domestic import duties separately, but EU VAT is not charged.

How long does shipping take to the US or South Korea?

Typical transit time is 7-14 business days from Lithuania via DHL, FedEx, or UPS. Customs clearance may add 1-3 days depending on the destination country and the volume of your shipment.

Can I buy a complete AMG-style kit as one package instead of individual parts?

Yes. DL Auto Design offers full body kit packages for the W907 and W910 that bundle the front bumper, grille, side skirts, rear bumper, and roof spoiler. Package pricing is lower than buying each part separately.

Are any W907 body kit parts TUV certified?

Yes. Several bumper and splitter designs carry TUV certificates from an independent German testing authority. Check the individual product page for current certification status, as it applies per part number and design revision.

A Sprinter W907 AMG body kit transforms the VS30 platform from a capable commercial van into a visually commanding vehicle that reflects the AMG aesthetic without the factory AMG price tag. At DL Auto Design, we manufacture every component - front bumper, AMG-style grille, side skirts, rear bumper, diffuser, and roof spoiler - in-house in Lithuania, with fitment engineered to your specific build date and wheelbase. US buyers benefit from worldwide shipping and 0% EU VAT; South Korean luxury-shuttle builders can order full kit packages with custom colour options. Explore our W907 product range at dlautodesign.com and contact us directly if you need a fitment consultation before placing your order.